Optimizing Electrode Configuration for Electrical Impedance Measurements of Muscle via the Finite Element Method
Open Access
- 1 May 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 60 (5), 1446-1452
- https://doi.org/10.1109/tbme.2012.2237030
Abstract
Electrical impedance myography (EIM) is a technique for the evaluation of neuromuscular diseases, including amyotrophic lateral sclerosis and muscular dystrophy. In this study, we evaluated how alterations in the size and conductivity of muscle and thickness of subcutaneous fat impact the EIM data, with the aim of identifying an optimized electrode configuration for EIM measurements. Finite element models were developed for the human upper arm based on anatomic data; material properties of the tissues were obtained from rat and published sources. The developed model matched the frequency-dependent character of the data. Of the three major EIM parameters, resistance, reactance, and phase, the reactance was least susceptible to alterations in the subcutaneous fat thickness, regardless of electrode arrangement. For example, a quadrupling of fat thickness resulted in a 375% increase in resistance at 35 kHz but only a 29% reduction in reactance. By further optimizing the electrode configuration, the change in reactance could be reduced to just 0.25%. For a fixed 30 mm distance between the sense electrodes centered between the excitation electrodes, an 80 mm distance between the excitation electrodes was found to provide the best balance, with a less than 1% change in reactance despite a doubling of subcutaneous fat thickness or halving of muscle size. These analyses describe a basic approach for further electrode configuration optimization for EIM.Keywords
This publication has 14 references indexed in Scilit:
- Utilizing a handheld electrode array for localized muscle impedance measurementsMuscle & Nerve, 2012
- The effect of subacute denervation on the electrical anisotropy of skeletal muscle: Implications for clinical diagnostic testingClinical Neurophysiology, 2010
- Electrical characteristics of rat skeletal muscle in immaturity, adulthood and after sciatic nerve injury, and their relation to muscle fiber sizePhysiological Measurement, 2009
- Electrical impedance myography: Background, current state, and future directionsMuscle & Nerve, 2009
- Discriminating neurogenic from myopathic disease via measurement of muscle anisotropyMuscle & Nerve, 2008
- Electrical impedance myography to assess outcome in amyotrophic lateral sclerosis clinical trialsClinical Neurophysiology, 2007
- Impact of skin-subcutaneous fat layer thickness on electrical impedance myography measurements: An initial assessmentClinical Neurophysiology, 2007
- Localized bioimpedance analysis in the evaluation of neuromuscular diseaseMuscle & Nerve, 2002
- Spatial dependence of the phase in localized bioelectrical impedance analysisPhysics in Medicine & Biology, 2001
- Anisotropy in the dielectric properties of skeletal muscleMedical & Biological Engineering & Computing, 1983