The path to the high performance thermal building insulation materials and solutions of tomorrow
- 20 July 2010
- journal article
- research article
- Published by SAGE Publications in Journal of Building Physics
- Vol. 34 (2), 99-123
- https://doi.org/10.1177/1744259110372782
Abstract
In today’s society there is an increased focus on various energy aspects. Buildings constitute a large part of the total energy consumption in the world. In this respect it is important to have the optimum heat balance in buildings. That is, in a cold climate one wants to have as well thermally insulated building envelopes as possible. However, even in cold climates there might often be relatively long periods of overheating in the buildings, for example, due to solar heat gains and excessive heat loads from miscellaneous indoor activities. In warm climates overheating is most often the case, for example, in office work spaces with large window glass facades and extensive use of electrical equipment. Insulation retrofit is among the most cost-effective measures, even more cost-effective than, for example, solar photovoltaics. The traditional thermal insulation materials of today have typically thermal conductivities between 33 and 40 mW/(mK). State-of-the-art thermal insulation includes vacuum insulation panels (VIPs) with conductivities between 3 and 4 mW/(mK) in fresh condition to typically 8 mW/(mK) after 25 years aging due to water vapor and air diffusion into the VIP core material, which has an open pore structure. Puncturing the VIP envelope causes an increase in the thermal conductivity to about 20 mW/(mK). The main emphasis of this work centers around the possibilities of inventing and developing innovative and robust highly thermal insulating materials. That is, within this work the objective is to go beyond VIPs and other current state-of-the-art technologies. New concepts are introduced, that is, advanced insulation materials (AIMs) as vacuum insulation materials (VIMs), gas insulation materials (GIMs), nano insulation materials (NIMs), and dynamic insulation materials (DIMs). These materials may have closed pore structures (VIMs and GIMs) or either open or closed pore structures (NIMs). The DIMs aim at controlling the material insulation properties, that is, solid state thermal conductivity, emissivity, and pore gas content. Fundamental theoretical studies aimed at developing an understanding of the basics of thermal conductance in solid state matter at an elementary and atomic level have been addressed. The ultimate goal of these studies is to develop tailor-made novel high performance thermal insulation materials and dynamic insulation materials, the latter one enabling to control and regulate the thermal conductivity in the materials themselves, that is from highly insulating to highly conducting. Furthermore, requirements of the future high performance thermal insulation materials and solutions have been proposed. At the moment, the NIM solution seems to represent the best high performance low conductivity thermal solution for the foreseeable future. If robust and practical DIMs can be manufactured, they have great potential due to their thermal insulation regulating abilities.Keywords
This publication has 55 references indexed in Scilit:
- Thermal conductivity of a clay-based aerogelInternational Journal of Heat and Mass Transfer, 2009
- An Analytical Model for Calculating Thermal Bridge Effects in High Performance Building EnclosureJournal of Building Physics, 2008
- Analytical Models for Calculating Thermal Bridge Effects Caused by Thin High Barrier Envelopes around Vacuum Insulation PanelsJournal of Building Physics, 2007
- Nanoscale radiation heat transfer for silicon at different doping levelsInternational Journal of Heat and Mass Transfer, 2006
- A review on energy conservation in building applications with thermal storage by latent heat using phase change materialsEnergy Conversion and Management, 2004
- A review on phase change energy storage: materials and applicationsEnergy Conversion and Management, 2003
- Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniquesEnergy Conversion and Management, 1998
- Possible highT c superconductivity in the Ba?La?Cu?O systemZeitschrift für Physik B Condensed Matter, 1986
- Effect of Small Spacings on Radiative Transfer Between Two DielectricsJournal of Heat Transfer, 1967
- On the Problem of the Molecular Theory of SuperconductivityPhysical Review B, 1948