Reproducible mini-slump test procedure for measuring the yield stress of cementitious pastes
Open Access
- 19 October 2017
- journal article
- Published by Springer Science and Business Media LLC in Materials and Structures
- Vol. 50 (6), 1-12
- https://doi.org/10.1617/s11527-017-1103-x
Abstract
The mini-slump test is a fast, inexpensive and widely adopted method for evaluating the workability of fresh cementitious pastes. However, this method lacks a standardised procedure for its experimental implementation, which is crucial to guarantee reproducibility and reliability of the test results. This study investigates and proposes a guideline procedure for mini-slump testing, focusing on the influence of key experimental (mixing and testing) parameters on the statistical performance of the results. The importance of preparation of always testing at the same time after mixing, testing each batch once rather than conducting multiple tests on a single batch of material, is highlighted. A set of alkali-activated fly ash-slag pastes, spanning from 1 to 75 Pa yield stresses, were used to validate the test method, by comparison of calculated yield stresses with the results obtained using a conventional vane viscometer. The proposed experimental procedure for mini-slump testing produces highly reproducible results, and the yield stress calculated from mini-slump values correlate very well with those measured by viscometer, in the case of fresh paste of pure shear flow. Mini-slump testing is a reliable method that can be utilised for the assessment of workability of cements.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/M003272/1)
This publication has 26 references indexed in Scilit:
- Use of creep recovery protocol to measure static yield stress and structural rebuilding of fresh cement pastesCement and Concrete Research, 2016
- Field-oriented test methods to evaluate structural build-up at rest of flowable mortar and concreteMaterials and Structures, 2012
- Understanding the rheology of concretePublished by Elsevier BV ,2012
- Significance of Tests and Properties of Concrete and Concrete-Making MaterialsPublished by ASTM International ,2006
- Rotating vane rheometry — a reviewJournal of Non-Newtonian Fluid Mechanics, 2001
- The influence of wall slip on yield stress and viscoelastic measurements of cement pasteCement and Concrete Research, 2001
- Yield stress measurements with the vaneJournal of Non-Newtonian Fluid Mechanics, 1996
- Measuring the Flow Properties of Yield Stress FluidsAnnual Review of Fluid Mechanics, 1992
- Vane rheometry of bentonite gelsJournal of Non-Newtonian Fluid Mechanics, 1991
- Direct Yield Stress Measurement with the Vane MethodJournal of Rheology, 1985