Engineered Slippery Surface to Mitigate Gypsum Scaling in Membrane Distillation for Treatment of Hypersaline Industrial Wastewaters
- 14 November 2018
- journal article
- research article
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 52 (24), 14362-14370
- https://doi.org/10.1021/acs.est.8b04836
Abstract
Membrane distillation (MD) is an emerging thermal desalination process, which can potentially treat high salinity industrial wastewaters, such as shale gas produced water and power plant blowdown. The performance of MD systems is hampered by inorganic scaling, particularly when treating hypersaline industrial wastewaters with high-scaling potential. In this study, we developed a scaling-resistant MD membrane with an engineered “slippery” surface for desalination of high-salinity industrial wastewaters at high water recovery. A polyvinylidene fluoride (PVDF) membrane was grafted with silica nanoparticles, followed by coating with fluoroalkylsilane to lower the membrane surface energy. Contact angle measurements revealed the “slippery” nature of the modified PVDF membrane. We evaluated the desalination performance of the surface-engineered PVDF membrane in direct contact membrane distillation using a synthetic wastewater with high gypsum scaling potential as well as a brine from a power plant blowdown. Results show that gypsum scaling is substantially delayed on the developed slippery surface. Compared to the pristine PVDF membrane, the modified PVDF membranes exhibited a stable MD performance with reduced scaling potential, demonstrating its potential to achieve high water recovery in treatment of high-salinity industrial wastewaters. We conclude with a discussion of the mechanism for gypsum scaling inhibition by the engineered slippery surface.Keywords
Funding Information
- University of Arizona
- National Science Foundation (2016227750)
This publication has 50 references indexed in Scilit:
- Bio-inspired superoleophobic and smart materials: Design, fabrication, and applicationProgress in Materials Science, 2013
- Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicityNature, 2011
- Molecular origins of fluorocarbon hydrophobicityProceedings of the National Academy of Sciences of the United States of America, 2010
- Supersaturation Control and Heterogeneous Nucleation in Membrane Crystallizers: Facts and PerspectivesIndustrial & Engineering Chemistry Research, 2010
- Fouling in direct contact membrane distillation processJournal of Membrane Science, 2008
- Biomimetic Superhydrophobic Surfaces: Multiscale ApproachNano Letters, 2007
- Superhydrophobic surfacesCurrent Opinion in Colloid & Interface Science, 2006
- Preparation and Characterization of Polyvinylidene Fluoride Membranes for Membrane DistillationIndustrial & Engineering Chemistry Research, 2001
- Surface modification of poly(vinylidene fluoride) by alkaline treatment1. The degradation mechanismPolymer, 2000
- Kinetische Behandlung der Keimbildung in übersättigten DämpfenAnnalen der Physik, 1935