A Simulation Model for the Combustion Process of Natural Gas Engines with Pilot Diesel Fuel as an Ignition Source
- 5 March 2001
- conference paper
- conference paper
- Published by SAE International in SAE Technical Paper Series
Abstract
During the last years a great deal of efforts have been made to reduce pollutant emissions from Direct Injection Diesel Engines. The use of gaseous fuel as a supplement for liquid diesel fuel seems to be one solution towards these efforts. One of the fuels used is natural gas, which has a relatively high auto - ignition temperature and moreover it is an economical and clean burning fuel. The high auto - ignition temperature of natural gas is a serious advantage against other gaseous fuels since the compression ratio of most conventional diesel engines can be maintained. The main aspiration from the usage of dual fuel (liquid and gaseous one) combustion systems, is the reduction of particulate emissions. In the present work are given results of a theoretical investigation using a model developed for the simulation of gaseous fuel combustion processes in Dual Fuel Engines. The model is a two - zone combustion one, taking into account details of diesel fuel spray formation and mixing with the surrounding gas, which is a mixture of air and natural gas. The natural gas burning initiates after the ignition of the diesel fuel. The combustion rate of natural gas depends on the rate of entrainment of surrounding gas into the fuel jet formed and on the velocity of the flame front, which is formed around the area of the burning zone and spreads inside the combustion chamber. The flame front, which is used in the present work, takes into account the history of pressure and temperature values inside the chamber and the local composition to estimate the flame velocity. The model is applied on a single cylinder test engine located at the author's laboratory at various operating conditions. The engine performance under normal diesel operation is used as basis for evaluating engine performance and emissions when using gaseous fuel. The engine load is controlled by changing the amount of the primary gaseous fuel added to the intake air, while the quantity of the pilot liquid fuel per injection stroke is fixed for the given engine regardless of engine operating conditions. It is examined the effect of gaseous fuel quantity (load) on engine performance and emissions at various operating conditions. From the results it is revealed a change of the heat release mechanism when compared to standard diesel operation, an increase of maximum combustion pressure and an increase of NO emissions especially at high engine load. On the other hand soot emissions are considerably reduced and become negligible.Keywords
This publication has 18 references indexed in Scilit:
- Development of a Simulation Model for Direct Injection Dual Fuel Diesel-Natural Gas EnginesSAE International Journal of Advances and Current Practices in Mobility, 2000
- An examination of the flame spread limits in a dual fuel engineApplied Thermal Engineering, 1999
- Prediction of Major Pollutants Emission in Direct - Injection Dual - Fuel Diesel and Natural - Gas EnginesSAE International Journal of Advances and Current Practices in Mobility, 1999
- Multi-Dimensional Modeling of Natural Gas Ignition Under Compression Ignition Conditions Using Detailed ChemistrySAE International Journal of Advances and Current Practices in Mobility, 1998
- Simulation of combustion processes in gas-fuelled diesel enginesProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 1997
- A Predictive Model for Knock in Dual Fuel EnginesSAE International Journal of Advances and Current Practices in Mobility, 1992
- A review of combustion processes in the dual fuel engine—The gas diesel engineProgress in Energy and Combustion Science, 1980
- Prediction of Heat Release in a Quiescent Chamber Diesel Engine Allowing for Fuel/Air MixingPublished by SAE International ,1974
- Examination of Effective Rates of Combustion Heat Release in a Dual-Fuel EngineJournal of Mechanical Engineering Science, 1968
- Heat Transfer in the Cylinders of Reciprocating Internal Combustion EnginesProceedings of the Institution of Mechanical Engineers, 1963