Carbon monoxide poisoning of proton exchange membrane fuel cells
- 29 May 2001
- journal article
- research article
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 25 (8), 695-713
- https://doi.org/10.1002/er.713
Abstract
Proton exchange membrane fuel cell (PEMFC) performance degrades when carbon monoxide (CO) is present in the fuel gas; this is referred to as CO poisoning. This paper investigates CO poisoning of PEMFCs by reviewing work on the electrochemistry of CO and hydrogen, the experimental performance of PEMFCs exhibiting CO poisoning, methods to mitigate CO poisoning and theoretical models of CO poisoning. It is found that CO poisons the anode reaction through preferentially adsorbing to the platinum surface and blocking active sites, and that the CO poisoning effect is slow and reversible. There exist three methods to mitigate the effect of CO poisoning: (i) the use of a platinum alloy catalyst, (ii) higher cell operating temperature and (iii) introduction of oxygen into the fuel gas flow. Of these three methods, the third is the most practical. There are several models available in the literature for the effect of CO poisoning on a PEMFC and from the modeling efforts, it is clear that small CO oxidation rates can result in much increased performance of the anode. However, none of the existing models have considered the effect of transport phenomena in a cell, nor the effect of oxygen crossover from the cathode, which may be a significant contributor to CO tolerance in a PEMFC. In addition, there is a lack of data for CO oxidation and adsorption at low temperatures, which is needed for detailed modeling of CO poisoning in PEMFCs. Copyright © 2001 John Wiley & Sons, Ltd.Keywords
This publication has 25 references indexed in Scilit:
- Components for PEM fuel cell systems using hydrogen and CO containing fuelsElectrochimica Acta, 1998
- Thermodynamics of Insulated Pressure Vessels for Vehicular Hydrogen StorageJournal of Energy Resources Technology, 1998
- Analysis of Reaction Kinetics for Carbon Monoxide and Carbon Dioxide on Polycrystalline Platinum Relative to Fuel Cell OperationIndustrial & Engineering Chemistry Research, 1996
- Electrooxidation of CO and H2/CO Mixtures on a Well-Characterized Pt3Sn Electrode SurfaceThe Journal of Physical Chemistry, 1995
- Research, Development, and Demonstration of Solid Polymer Fuel Cell SystemsPublished by Springer Science and Business Media LLC ,1993
- A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel CellJournal of the Electrochemical Society, 1992
- Electrochemical oxidation of adsorbed carbon monoxide on platinum spherical single crystalsJournal of Electroanalytical Chemistry and Interfacial Electrochemistry, 1990
- Nature of CO Adsorption during H 2 Oxidation in Relation to Modeling for CO Poisoning of a Fuel Cell AnodeJournal of the Electrochemical Society, 1987
- Performance Study of a Fuel Cell Pt‐on‐C Anode in Presence of CO and CO 2, and Calculation of Adsorption Parameters for CO PoisoningJournal of the Electrochemical Society, 1986
- The Mechanism of Electrochemical Oxidation of Carbon Monoxide and Methanol on Platinum. II. The “Reactant-Pair” Mechanism for Electrochemical Oxidation of Carbon Monoxide and Methanol1The Journal of Physical Chemistry, 1964