Characterization of Polycaprolactone Nanohydroxyapatite Composites with Tunable Degradability Suitable for Indirect Printing
Open Access
- 18 January 2021
- Vol. 13 (2), 295
- https://doi.org/10.3390/polym13020295
Abstract
Degradable bone implants are designed to foster the complete regeneration of natural tissue after large-scale loss trauma. Polycaprolactone (PCL) and hydroxyapatite (HA) composites are promising scaffold materials with superior mechanical and osteoinductive properties compared to the single materials. However, producing three-dimensional (3D) structures with high HA content as well as tuneable degradability remains a challenge. To address this issue and create homogeneously distributed PCL-nanoHA (nHA) scaffolds with tuneable degradation rates through both PCL molecular weight and nHA concentration, we conducted a detailed characterisation and comparison of a range of PCL-nHA composites across three molecular weight PCLs (14, 45, and 80 kDa) and with nHA content up to 30% w/w. In general, the addition of nHA results in an increase of viscosity for the PCL-nHA composites but has little effect on their compressive modulus. Importantly, we observe that the addition of nHA increases the rate of degradation compared to PCL alone. We show that the 45 and 80 kDa PCL-nHA groups can be fabricated via indirect 3D printing and have homogenously distributed nHA even after fabrication. Finally, the cytocompatibility of the composite materials is evaluated for the 45 and 80 kDa groups, with the results showing no significant change in cell number compared to the control. In conclusion, our analyses unveil several features that are crucial for processing the composite material into a tissue engineered implant.Keywords
This publication has 49 references indexed in Scilit:
- 3D bioactive composite scaffolds for bone tissue engineeringBioactive Materials, 2018
- Degradation rate of DNA scaffolds and bone regenerationJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2018
- Treatment of critical-sized bone defects: clinical and tissue engineering perspectivesEuropean Journal of Orthopaedic Surgery & Traumatology, 2017
- Size Matters: Defining Critical in Bone Defect Size!Journal of Orthopaedic Trauma, 2017
- Bone grafts and biomaterials substitutes for bone defect repair: A reviewBioactive Materials, 2017
- Metals for bone implants: safety, design, and efficacyBiomanufacturing Reviews, 2016
- Bone substitutes in orthopaedic surgery: from basic science to clinical practiceJournal of Materials Science: Materials in Medicine, 2014
- Bone Regeneration Based on Tissue Engineering Conceptions — A 21st Century PerspectiveBone Research, 2013
- Biomimetic Systems for Hydroxyapatite Mineralization Inspired By Bone and EnamelChemical Reviews, 2008
- Osteoinduction, osteoconduction and osseointegrationEuropean Spine Journal, 2001