Research on Cu-6.6%Al-3.2%Si Alloy by Dual Wire Arc Additive Manufacturing
- 27 January 2021
- journal article
- research article
- Published by Springer Science and Business Media LLC in Journal of Materials Engineering and Performance
- Vol. 30 (3), 1694-1702
- https://doi.org/10.1007/s11665-021-05470-4
Abstract
No abstract availableKeywords
This publication has 38 references indexed in Scilit:
- Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4VJournal of the American Academy of Dermatology, 2012
- Effects of stacking fault energy on the thermal stability and mechanical properties of nanostructured Cu–Al alloys during thermal annealingJournal of Materials Research, 2011
- First-principles data for solid-solution strengthening of magnesium: From geometry and chemistry to propertiesActa Materialia, 2010
- Ageing behavior in the Cu–10wt.%Al and Cu–10wt.%Al–4wt.%Ag alloysJournal of Alloys and Compounds, 2009
- Characterization of a powder metallurgy SiC/Cu–Al compositeJournal of the American Academy of Dermatology, 2008
- Microstructural characterization of precipitates in Cu–10wt.%Al–0.8wt.%Be shape-memory alloyMaterials Science and Engineering: A, 2006
- An Assessment of Thermodynamic Data for the Liquid Phase in the Al-Rich Corner of the Al-Cu-Si System and Its Application to the Solidification of a 319 AlloyJournal of Phase Equilibria and Diffusion, 2005
- The effect of Si additions on Ω precipitation in Al–Cu–Mg–(Ag) alloysScripta Materialia, 2004
- Phase equilibria and Heusler phase stability in the Cu-rich portion of the Cu–Al–Mn systemJournal of Alloys and Compounds, 1998
- An investigation of microstructural stability in an AlMg alloy with submicrometer grain sizeActa Materialia, 1996