Exploring Electrochemical Extrusion of Wires from Liquid Metals
- 8 July 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (27), 31010-31020
- https://doi.org/10.1021/acsami.0c07697
Abstract
Metal melt extrusion in gaseous or vacuum environments is a classical approach for forming wires. However, such extrusions have not been investigated in ionic solutions. Here, we use liquid metal (LM) gallium (Ga) and its eutectic alloy with indium (EGaIn) to explore the possibility of electrochemical extrusion of wires and study the tuning of the self-liming oxide layers as the coating for these wires formed during the process. By controlling the surface tension of the LM immersed in an electrolyte, and through the electrocapillary effect, we enable the extrusion of LM wires. The surface morphologies of LM wires and the thickness of the oxide layers are investigated when Ga and EGaIn are processed in neutral and basic electrolytes using various voltages. Taking advantage of the LM oxides, we show that LM wires offer tunable surface oxide thickness and composition using the electrochemical system and investigate the related working mechanisms. The wires are formed into patterns using an automated stage and show a self-healing capability. This work presents an unconventional method for electrochemical fabrication of LM wires, offering prospects for further research and industrial scale-up.Funding Information
- Australian Research Council (CE170100039, FL180100053)
This publication has 68 references indexed in Scilit:
- Direct Desktop Printed-Circuits-on-Paper Flexible ElectronicsScientific Reports, 2013
- Increased circulatory RAS activity can be inhibited by statins in patients with hypercholesterolemiaJournal of the Renin-Angiotensin-Aldosterone System, 2013
- Droplet formation and scaling in dense suspensionsProceedings of the National Academy of Sciences of the United States of America, 2012
- Transparent Conductors from Layer-by-Layer Assembled SWNT Films: Importance of Mechanical Properties and a New Figure of MeritACS Nano, 2010
- Some factors affecting supercooling and the equilibrium freezing point in soil–water systemsCold Regions Science and Technology, 2009
- Sintering and consolidation of silver nanoparticles printed on polyimide substrate filmsMacromolecular Research, 2009
- Raman spectroscopy and characterisation of α‐gallium oxyhydroxide and β‐gallium oxide nanorodsJournal of Raman Spectroscopy, 2008
- Inkjet printing as a deposition and patterning tool for polymers and inorganic particlesSoft Matter, 2008
- High precision solder droplet printing technology and the state-of-the-artJournal of the American Academy of Dermatology, 2001
- On the resistivity and surface tension of the eutectic alloy of gallium and indiumJournal of the Less Common Metals, 1969