Journal | Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

in Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering; doi:10.11159/mmme20.117

Conference: 6th World Congress on Mechanical, Chemical, and Material Engineering, 2020-8-16 - 2020-8-18

Chemical inhibitors as potential allied for CO2 replacement in gas hydrates reservoirs: sodium chloride case study

Alberto Maria Gambelli ,

Beatrice Castellani ,

Mirko Filipponi ,

Andrea Nicolini ,

Federico Rossi

Published: 1 August 2020

in Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering; doi:10.11159/iccpe20.111

Conference: 6th World Congress on Mechanical, Chemical, and Material Engineering, 2020-8-16 - 2020-8-18

2D Axisymmetric Modelling of Single Liquid Droplet Impingement at High Speeds on Thin Liquid Films in Compressible Regime

Mason Marzbali ,

Ali Dolatabadi

Published: 1 August 2020

in Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering; doi:10.11159/htff20.146

Conference: 6th World Congress on Mechanical, Chemical, and Material Engineering, 2020-8-16 - 2020-8-18

The Run Out Table in the Lab: Quenching of Fast Moving Steel Plates

C.F Gomez, C.W.M. Van Der Geld, J.G.M. Kuerten, M. Bsibsi, B.P.M. Van Esch

Published: 1 August 2020

in Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering; doi:10.11159/htff20.163

Conference: 6th World Congress on Mechanical, Chemical, and Material Engineering, 2020-8-16 - 2020-8-18

Flow Boiling Characteristics in a Microchannel with Various WettabilityPatterned Surfaces

Hongzhao Wang, Yinchuang Yang, Huihe Qiu

Published: 1 August 2020

in Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering; doi:10.11159/htff20.184

Conference: 6th World Congress on Mechanical, Chemical, and Material Engineering, 2020-8-16 - 2020-8-18

Fluid Mechanics and Optics: the effect of turbulence in the observation of the Universe

Ramon Codina

Published: 1 August 2020

in Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering; doi:10.11159/icmie20.01

Conference: 6th World Congress on Mechanical, Chemical, and Material Engineering, 2020-8-16 - 2020-8-18

CFD Simulations of Gas Holdup in a Bubble Column at High Gas Temperature of a Helium-Water System

Mohammed W. Abdulrahman

Published: 1 August 2020

in Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering; doi:10.11159/htff20.169

Conference: 6th World Congress on Mechanical, Chemical, and Material Engineering, 2020-8-16 - 2020-8-18

Detachment of an Oil Droplet from Adhesive Surface Induced by Reversed Electrowetting

Qinggong Wang ,

Ning Weng , Wei Yao

Published: 1 August 2020

in Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering; doi:10.11159/htff20.176

Conference: 6th World Congress on Mechanical, Chemical, and Material Engineering, 2020-8-16 - 2020-8-18

Study of the geomechanical behaviour of different saline typologies in the Catalan basin

Nor Sidki, Marc Bascompta, Lluís Sanmiquel

Published: 1 August 2020

in Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering; doi:10.11159/mmme20.124

Conference: 6th World Congress on Mechanical, Chemical, and Material Engineering, 2020-8-16 - 2020-8-18

Determination of Economic Liberation and Mineralogical Characteristics of Nigerian Iron Ore for Effective Processing

O. O. Ola-Omole, W. Nheta

Published: 1 August 2020

in Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering

Proceedings of the 6th World Congress on Mechanical, Chemical, and Material Engineering; doi:10.11159/mmme20.133

Conference: 6th World Congress on Mechanical, Chemical, and Material Engineering, 2020-8-16 - 2020-8-18