Results in Journal Jurnal Sisfokom (Sistem Informasi dan Komputer): 181
(searched for: journal_id:(4139986))
Jurnal Sisfokom (Sistem Informasi dan Komputer), Volume 9, pp 195-202; doi:10.32736/sisfokom.v9i2.827
Palembang is one of the regions in Indonesia which is known for having culinary which has a distinctive and delicious taste. Besides having a distinctive taste, Palembang cuisine also has its own story related to the history of Palembang City and the development of people's lives there. The many types of culinary and culinary tourist attractions in the city of Palembang provide its own obstacles for tourists and local residents in choosing a culinary meal and the route to the culinary location. The solution to the problem proposed is to make the application for the shortest route search for culinary locations typical of Palembang using the Euclidean Distance and A * algorithm. Euclidean Distance algorithm which is a calculation of the distance from two points as a basis in finding the shortest route and gives the user information about the location that is around the user by comparing the distances and applying the A * algorithm as a basis in finding the shortest route using the smallest estimated cost to achieve the goals to be achieved, and has a heuristic value that is used as a basis for consideration. The final results of the study showed that the algorithm performed had a high degree of accuracy in determining the shortest culinary route location in Palembang, namely the Mean Mean percentage error (MAPE) of 4.4%.
Jurnal Sisfokom (Sistem Informasi dan Komputer), Volume 9, pp 185-194; doi:10.32736/sisfokom.v9i2.856
Palang Merah Indonesia (PMI) is a social organization in the city of Bandung. In the business process, the blood donor section has not used any software that satisfies the need to connect communities and PMI on blood donor information. So it takes software that can help the process of running blood donor business to minimize the problems that occur such as human error and not spread information about blood supply. RE (Requirement Engineering) is an early stage as an important task, as many software failures come from inconsistent, incomplete or just wrong specification requirements. In RE there is a process that is requirement analysis to do analysis of user needs. Goal Oriented Requirements Engineering (GORE) is one of the models that can be used to analyse user needs. One method on the GORE model is the TROPOS method. The use of TROPOS on the development of the blood stock management software to focus on the needs analysis on the stages of modeling early requirement and late requirement. The results of the analysis are implemented into web software design. Software that has been created based on the modeling evaluated using BlackBox Testing with user acceptance test (UAT) by stakeholders. Based on the results of the assessment UAT score, the results of the respondents assessment is 3.55%, so that the blood stock management software can be used as a supporting tool to run the blood stock business process of PMI.
Jurnal Sisfokom (Sistem Informasi dan Komputer), Volume 9, pp 177-184; doi:10.32736/sisfokom.v9i2.803
The village of Pageraji is one of the village governments located in the western capital of Banyumas Regency. The process of administration services in Pageraji Village still uses conventional systems. Based on the analysis of the problem, researchers will make planning the enterprise architecture to know in detail the business process and the stages in the Pageraji Village hall. The method used is TOGAF ADM by using four stages, namely architecture stage of vision, business architecture, information system architecture, and technology architecture. The overall analysis of the results of 4 phases of TOGAF ADM obtained the conformity between architectural needs and the recommended architecture seen from the results of analysis of requirement management with the four stages of TOGAF ADM. The results of this study are architectural planning companies.
Jurnal Sisfokom (Sistem Informasi dan Komputer), Volume 9, pp 171-176; doi:10.32736/sisfokom.v9i2.855
Wordnet is a collection of words that interpret or present a meaning, in its development Wordnet has an important part, the Synonym Set or Synset. In making Synonym sets, synonyms are needed and the commutative nature of words is needed. To get word synonyms, the English language thesaurus becomes the reference data for taking synonym data. Broadly speaking, the difference between Wordnet and the dictionary is that the meaning of the word is related to other words, to determine the equation requires a commutative process. The process is made easy by using commutative methods that will produce a candidate synonym set. Candidates for the synonym set cannot be used for word syntax, the grouping process of words which produces the Synonym set as the final result must be carried out. The process of grouping words can one of them use clustering techniques, in this study will use Agglomerative Clustering techniques. In the process of agglomerative clustering techniques there is a threshold value to determine the number of repetitions or as a condition to stop the iteration process. The clustering process in this study will use a threshold value of 0.1 to 1 to test the best threshold value to produce the best Synonym set and calculate its accuracy value. Accuracy calculation and evaluation will use the F-measure method to find the best results.
Jurnal Sisfokom (Sistem Informasi dan Komputer), Volume 9, pp 165-170; doi:10.32736/sisfokom.v9i2.853
On the development of Indonesian WordNet, the synonym set is an important part that represents the similarity of meaning between words. Synonym sets are built using the Indonesian Thesaurus as the lexical database. After going through the extraction process from the Indonesian Thesaurus, we will get a synonym set that has a similarity or word sense between words. In general, the difference between WordNet and the dictionary is their main focus, in which the dictionary usually focuses on just one word, while in WordNet the focus is on the meaning of words and connectedness with other words. Explained in previous research, the constructions of synonym sets were done using several approaches, which is clustering to produce synonym sets and WSD (Word Sense Disambiguation). In this article, the approach used to produce synonym sets is the ROCK (Robust Clustering Using Links) algorithm, which uses similarity and link values. The resulting synonym sets will then be used for lexical database development. Therefore, the main focus of this article is to produce synonym sets through the clustering process and calculate their accuracy, using the F-Measure method involving the gold standard for performance calculation and evaluation.
Jurnal Sisfokom (Sistem Informasi dan Komputer), Volume 9, pp 158-164; doi:10.32736/sisfokom.v9i2.802
A Lecturer as an educator in Higher Education System has an obligation to fulfill the Tri Dharma University which consists of Education, Research and Community Service. A research, which is a part of the lecturer responsibility, shall be conducted in various activities with the cost coming from a wide range of sources. Bina Darma University through the Research and Community Service Institute has an agenda to administer Internal Research Grants which aim to facilitate and motivate Lecturers in the research activities. The assessment of Research proposal is carried out by a reviewer appointed directly by the institution. The reviewer has a full right to determine whether the proposal would be funded or not. The reviewer's full right may affect the objectivity of assessment by the Reviewer which eventually would influence the final decision. Thus, this research aims to design a system for determining the acceptance of Internal Research proposals, that is by using the implementation of Profile Matching Method. The final result of the study shows that the final value of the research proposal which will get the first rank is the value of the ID PROP007 with the final value 4.55. Meanwhile, the lowest end value is 3.1 obtained by ID PROP004. The assessments criteria contained in the research proposal include abstract, introduction, literature review, research methodology, budget conformance and research schedule.
Jurnal Sisfokom (Sistem Informasi dan Komputer), Volume 9, pp 152-157; doi:10.32736/sisfokom.v9i2.817
Thousands Ministry Regulations are found in Indonesia shows that it is a big number. These regulations are intended to focus on various fields in order to be upheld in the public interest. It has recently been discovered that the numbers are increasing and some are no longer enforced. Clustering in data mining can be used to find out the focus of problems are often discussed at each ministry. The method that will be used for clustering ministry regulation data is the K-Means algorithm. K-Means is a non-hierarchical data clustering method partitions data into clusters so data that has the same characteristics will be grouped into one cluster and data that has different characteristics will be grouped into another cluster. This research was conducted by conducting data collection, data cleaning, data processing, and visualization of the results. The results of this paper are grouping the best ministerial regulations into four clusters that have an inertia value of 405.142786991133. Cluster 0 is a collection of regulations on the empowerment of children, women, and victims of violence. Cluster 1 is a collection of regulations on environmental policies in both flora and fauna. Cluster 2 is a collection of regulations relating to science and professionalism. Cluster 3 is a collection of regulations relating to the safety of the creative economy in the field of tourism.
Published: 28 April 2020
Jurnal Sisfokom (Sistem Informasi dan Komputer), Volume 9, pp 144-151; doi:10.32736/sisfokom.v9i1.819
Student council election is a routine school activity every year, but currently the student council election is done manually using ballot papers containing the candidates. The weakness of this system is in addition to the process of getting longer results, it is also prone to fraud due to the excess of manipulated ballot papers, as well as being less environmentally friendly. Therefore the need for a system that is able to provide solutions to these problems, one of which is a responsive web-based student council election system. Web-based systems are more common than mobile-based systems, because they are supported by all device platforms, different if only based on mobile (Android), only devices based on the Android operating system can use the application. Moreover, web technology is now very good, responsive web allows the display of web pages to adjust to the user's screen size automatically, responsive web framework used in this study is bootstrap. In this study, researchers used a software development model which is a prototype. And for the tools used in developing this application is the Unified Modeling Language, and the system testing method uses a blackbox. The results of this study are expected to provide results in the form of a system that is fast and accurate, cost effective and environmentally friendly. Keywords: e-voting, bootstrap, prototype
Published: 27 April 2020
Jurnal Sisfokom (Sistem Informasi dan Komputer), Volume 9, pp 138-143; doi:10.32736/sisfokom.v9i1.837
A common problem that is often faced by almost most Barbershop is in terms of serving customer queues, for barbershops who have many customers and have many service chairs, then of course a good customer queue service management concept is needed as well. One of the concepts of queuing services for customers is how queue information can reach customers without queuing at the location. For this reason, a queue service concept for customers is needed based on Android. Android is preferred because almost all smartphone users are currently based on Android. The application will be built based on the concept of client server so that the queue service will occur in real time. The Queuing model used is Multi Channel Single Phase, because in the queue at barbershop there will only be one stage of the process, but it requires a lot of queue flow. This can be seen in the structure of the development diagram. By using an Android-based application based on a single phase multi channel model that will be built it is ensured that customers will find it helpful, without having to spend time in a queue customers can order queues and see queues in real time so they can rush to barbershop when it is close to the queue
Published: 24 April 2020
Jurnal Sisfokom (Sistem Informasi dan Komputer), Volume 9, pp 132-137; doi:10.32736/sisfokom.v9i1.840
Sekolah Dasar Islam pada dasarnya adalah sekolah yang menerapkan konsep pendidikan Islam berdasarkan al-Quran dan as-Sunnah. Banyak orang tua memiliki pilihan untuk mengirim anak-anak mereka ke sekolah Islam untuk mengeksplorasi agama Islam lebih lanjut. Tetapi seringkali orang tua bingung untuk menentukan pilihan mereka. Ini karena tidak ada metode atau alat yang dapat digunakan untuk menentukan sekolah dasar pilihan. Untuk itu, dirancang suatu sistem untuk menentukan Sekolah Dasar Islam dengan menggunakan metode Simple Additive weighting (SAW) dan Fuzzy Multi Attribute Decision Making (FMADM). Metode Simple Additive Weighting (SAW) digunakan untuk menentukan peringkat dari alternatif yang tersedia. Metode Fuzzy Multi Attribute Decision Making (FMADM) digunakan untuk menemukan alternatif dari banyak alternatif dengan kriteria yang telah ditentukan. Hasil penelitian ini dapat digunakan sebagai alat dalam pengambilan keputusan untuk merekomendasikan Sekolah Dasar yang berbasis Islam.