Design and Fabrication of a Nanoamorphous Interface Layer in B4C/Al Composites to Improve Hot Deformability and Corrosion Resistance
- 1 June 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 3 (6), 5752-5761
- https://doi.org/10.1021/acsanm.0c00932
Abstract
No abstract availableKeywords
Funding Information
- National Natural Science Foundation of China (51203035, 51571069, U1637201)
This publication has 43 references indexed in Scilit:
- Effect of the reinforced boron carbide particulate content of AA6061 alloy on formation of the passive film in seawaterCorrosion Science, 2011
- Forming behavior and workability of 6061/B4CP composite during hot deformationComposites Science and Technology, 2011
- Assessment of tensile behaviour of an Al–Mg alloy composite reinforced with NiAl and oxidized NiAl powder particles helped by nanoindentationComposites Part A: Applied Science and Manufacturing, 2007
- Stress corrosion cracking of cast 7XXX aluminium fibre reinforced compositesCorrosion Science, 2004
- Hot deformation and processing maps of a particulate reinforced 2618/Al2O3/20p metal matrix compositeComposites Science and Technology, 2003
- A study on pitting behaviour of AA2024/SiCp composites using the double cycle polarization technique.Corrosion Science, 1999
- Corrosion behaviour of AA6061 and AA7005 reinforced with Al2O3 particles in aerated 3.5% chloride solutions: potentiodynamic measurements and microstructure evaluationCorrosion Science, 1998
- The corrosion behaviour of aluminium-silicon carbide composites in aerated 3.5% sodium chlorideCorrosion Science, 1994
- Tribological performance of MoS2B2O3 compactsTribology International, 1990
- Electrochemical PolarizationJournal of the Electrochemical Society, 1957