Hybrid Geopolymeric Foams for the Removal of Metallic Ions from Aqueous Waste Solutions
Open Access
- 7 December 2019
- Vol. 12 (24), 4091
- https://doi.org/10.3390/ma12244091
Abstract
For the first time, hybrid organic–inorganic geopolymeric foams were successfully used as monolithic adsorbents for the removal of metallic ions pollutants from wastewaters. The foams were realized by the in situ foaming of a hybrid geopolymer obtained by a reaction of metakaolin and polysiloxane oligomers under strong alkaline conditions and then cured at room temperature. In this way, porous materials with densities ranging from 0.4 to 0.7 g/cm3 and showing good mechanical properties were produced. With the aim of producing self-standing monolithic adsorbents for the removal of metallic ions pollutants from wastewaters, these porous hybrid geopolymers were subjected to a washing pretreatment with ultrapure water, dried, and then used for absorption tests by dipping them into an aqueous solution with an initial concentration of 20 ppm of Pb2+, Cd2+, Cu2+, and Zn2+ ions. Preliminary results indicated that all the tested materials are effective in the adsorption of the tested metal ions and do not release the removed metal ions upon sinking in ultrapure water, even for a very long time. Interestingly, compressive strength tests performed before and after the washing treatments show that the foamed samples remain intact and maintain their physical–mechanical characteristics, suggesting that these kinds of materials are promising candidates for the production of self-standing, monolithic adsorbent substrates that can be easily collected when exhausted, which is a major advantage in comparison with the use of powdered adsorbents. Moreover, since these materials can be obtained by a simple and versatile experimental procedure, they could be easily shaped or directly foamed into precast molds to be used in packed beds as membranes.Keywords
This publication has 51 references indexed in Scilit:
- Effect of metallic Si addition on polymerization degree of in situ foamed alkali-aluminosilicatesCeramics International, 2013
- Synthesis and Characterization of Novel Epoxy Geopolymer Hybrid CompositesMaterials, 2013
- Preparation and Characterization of New Geopolymer-Epoxy Resin Hybrid MortarsMaterials, 2013
- Novel hybrid organic-geopolymer materialsApplied Clay Science, 2013
- Microstructure and properties of fly ash-based geopolymeric material with 5A zeolite as a fillerConstruction and Building Materials, 2012
- Lightweight geopolymer made of highly porous siliceous materials with various Na2O/Al2O3 and SiO2/Al2O3 ratiosMaterials Science and Engineering: A, 2011
- Fly ash-based geopolymer for Pb removal from aqueous solutionJournal of Hazardous Materials, 2011
- The mechanism of geopolymer gel formation investigated through seeded nucleationColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- Synthesis and heavy metal immobilization behaviors of slag based geopolymerJournal of Hazardous Materials, 2007
- Reduction of metal leaching in brown coal fly ash using geopolymersJournal of Hazardous Materials, 2004