Analysis on the Pose and Dynamic Response of Hydraulic Support under Dual Impact Loads
- 15 March 2018
- journal article
- research article
- Published by DAAAM International in International Journal of Simulation Modelling
- Vol. 17 (1), 69-80
- https://doi.org/10.2507/ijsimm17(1)412
Abstract
Hydraulic support is significant in the mining process because it serves as the primary supporting equipment in a coal mine. The roof beam and shield beam of hydraulic support are easily damaged because of the dynamic impact loads it has to bear. To improve its working performance, this study investigated the movement trend, pose, and mechanical response of hydraulic support when its roof beam and shield beam were subjected to impact loads. First, the roof beam, shield beam, and bars were made flexible using Hypermesh software. Then, a numerical simulation model of the hydraulic support was constructed using Adams software. The working resistance of the support was provided by two active external load signals applied vertically to the roof beam and located above the upper column. The impact load was applied along the normal direction of the top beam and the shield beam toward the symmetrical centre. The pose and stress state variations of the support were obtained under different impact conditions through measuring the variations of the rotation angles of the roof beam, deflection angles of the columns, length of the columns and balanced jack, and force of the hinge points. Results indicate that various trends of the hydraulic support under different impact effects are different, and in general, the support is more easily damaged when the impact load acts both on the roof beam and the shield beam compared with the single impact condition. This study is helpful for the stability control and structural design of the hydraulic support.Keywords
This publication has 13 references indexed in Scilit:
- Horizontal roof gap of backfill hydraulic supportJournal of Central South University, 2015
- A holistic examination of the load rating design of longwall shields after more than half a century of mechanised longwall miningInternational Journal of Mining Science and Technology, 2015
- Process Characteristics Of Hydraulic Legs Equipped With Safety Valves At Dynamic Load Caused By A Mining TremorArchives of Mining Sciences, 2015
- Stress analysis and stability analysis on doubly-telescopic prop of hydraulic supportEngineering Failure Analysis, 2013
- Numerical Analysis of an Interaction between Hydraulic-Powered Support and Surrounding Rock StrataInternational Journal of Geomechanics, 2013
- Modeling of dynamic friction behaviors of hydraulic cylindersMechatronics, 2012
- Studying of dynamic bear characteristics and adaptability of support in top coal caving with great mining heightProcedia Engineering, 2011
- Prediction of caving behavior of strata and optimum rating of hydraulic powered support for longwall workingsInternational Journal of Rock Mechanics and Mining Sciences, 2010
- A numerical modeling approach for assessment of progressive caving of strata and performance of hydraulic powered support in longwall workingsComputers and Geotechnics, 2009
- Synthesis of four-bar mechanism in a hydraulic support using a global optimization algorithmStructural and Multidisciplinary Optimization, 2002