Capacitance Electrochemical pH Sensor Based on Different Hafnium Dioxide (HfO2) Thicknesses
Open Access
- 9 January 2021
- journal article
- research article
- Published by MDPI AG in Chemosensors
- Vol. 9 (1), 13
- https://doi.org/10.3390/chemosensors9010013
Abstract
Over the past years, to achieve better sensing performance, hafnium dioxide (HfO2) has been studied as an ion-sensitive layer. In this work, thin layers of hafnium dioxide (HfO2) were used as pH-sensitive membranes and were deposited by atomic layer deposition (ALD) process onto an electrolytic-insulating-semiconductor structure Al/Si/SiO2/HfO2 for the realization of a pH sensor. The thicknesses of the layer of the HfO2 studied in this work was 15, 19.5 and 39.9 nm. HfO2 thickness was controlled by ALD during the fabrication process. The sensitivity toward H+ was clearly higher when compared to other interfering ions such as potassium K+, lithium Li+, and sodium Na+ ions. Mott−Schottky and electrochemical impedance spectroscopy (EIS) analyses were used to characterise and to investigate the pH sensitivity. This was recorded by Mott–Schottky at 54.5, 51.1 and 49.2 mV/pH and by EIS at 5.86 p[H−1], 10.63 p[H−1], 12.72 p[H−1] for 15, 19.5 and 30 nm thickness of HfO2 ions sensitive layer, respectively. The developed pH sensor was highly sensitive and selective for H+ ions for the three thicknesses, 15, 19.5 and 39.9 nm, of HfO2-sensitive layer when compared to the other previously mentioned interferences. However, the pH sensor performances were better with 15 nm HfO2 thickness for the Mott–Schottky technique, whilst for EIS analyses, the pH sensors were more sensitive at 39.9 nm HfO2 thickness.This publication has 34 references indexed in Scilit:
- Microfabricated electrochemical pH and free chlorine sensors for water quality monitoring: recent advances and research challengesRSC Advances, 2015
- Recent trends in potentiometric sensor arrays—A reviewAnalytica Chimica Acta, 2010
- Solution-Gated Epitaxial Graphene as pH SensorJournal of the American Chemical Society, 2008
- A Ratiometric CdSe/ZnS Nanocrystal pH SensorJournal of the American Chemical Society, 2006
- New technology for the detection of pHJournal of Biochemical and Biophysical Methods, 2005
- A wireless pH sensor based on the use of salt-independent micro-scale polymer spheresSensors and Actuators B: Chemical, 2003
- A salt-independent pH sensorSensors and Actuators B: Chemical, 2001
- A remote query magnetoelastic pH sensorSensors and Actuators B: Chemical, 2000
- Environmental Factors Relating to the Distribution of Terricolous Bryophytes and Lichens in Semi-Arid Eastern AustraliaThe Bryologist, 1997
- Adhesion of polymer films to oxidized silicon and its effect on performance of a conductometric pH sensorSensors and Actuators B: Chemical, 1996