In vitro evaluation of antimicrobial efficacy and durability of three copper surfaces used in healthcare
Open Access
- 1 January 2020
- journal article
- research article
- Published by American Vacuum Society in Biointerphases
- Vol. 15 (1), 011005
- https://doi.org/10.1116/1.5134676
Abstract
Antimicrobial properties of solid copper (Cu) surfaces against various microorganisms have been demonstrated, but little is known about the durability and relative antimicrobial efficacy of different Cu formulations currently used in healthcare. The aim of this study was to assess whether three different formulations of copper-bearing alloys (integral, spray-on and Cu-impregnated surfaces) and a stainless steel control differed in their antimicrobial efficacy, durability, and compatibility with hospital-grade cleaner/disinfectants. The U.S. Environmental Protection Agency draft protocol for the evaluation of bactericidal activity of Cu containing alloys was modified to more accurately reflect cleaning methods in healthcare. The three different Cu alloys were evaluated using 25 × 25 × 3 mm disks subjected to one year of simulated cleaning and disinfection using the Wiperator™ with microfiber cloths presoaked in three common hospital disinfectants: accelerated hydrogen peroxide, quaternary ammonium, or sodium hypochlorite solutions. Bactericidal activity was evaluated using Staphylococcus aureus and Pseudomonas aeruginosa. While all Cu formulations exhibited some antimicrobial activity, integral and spray-on Cu alloys showed the greatest efficacy. Assessments of durability included documentation of changes in mass, morphological changes by scanning electron microscopy, chemical composition alteration by energy-dispersive x-ray spectroscopy, and surface roughness alteration using profilometry over one year of simulated use. The integral Cu alloy had the least mass loss (0.20% and 0.19%) and abrasion-corrosion rate (6.28 and 6.09 μm/yr) compared to stainless steel. The integral product also showed the highest durability. Exposure to disinfectants affected both the antimicrobial efficacy and durability of the various copper products.Keywords
Funding Information
- Teck Resources Limited (28583000)
This publication has 13 references indexed in Scilit:
- New insights on antimicrobial efficacy of copper surfaces in the healthcare environment: a systematic reviewClinical Microbiology & Infection, 2018
- In situ antimicrobial behavior of materials with copper-based additives in a hospital environmentInternational Journal of Antimicrobial Agents, 2018
- Comparison of methods to evaluate bacterial contact-killing materialsActa Biomaterialia, 2017
- Decontamination of high-touch environmental surfaces in healthcare: Quantitative assessment of disinfectant pre-soaked wipes.International Journal of Infectious Diseases, 2016
- Antimicrobial surfaces to prevent healthcare-associated infections: a systematic reviewJournal of Hospital Infection, 2016
- Physicochemical properties of copper important for its antibacterial activity and development of a unified modelBiointerphases, 2015
- A review of 40 years of enteric antimicrobial resistance research in Eastern Africa: what can be done better?Published by Springer Science and Business Media LLC ,2015
- Evaluation of new in vitro efficacy test for antimicrobial surface activity reflecting UK hospital conditionsJournal of Hospital Infection, 2013
- Mechanism of copper surface toxicity in Escherichia coli O157:H7 and Salmonella involves immediate membrane depolarization followed by slower rate of DNA destruction which differs from that observed for Gram‐positive bacteriaEnvironmental Microbiology, 2011
- Copper and Quaternary Ammonium Cations Exert Synergistic Bactericidal and Antibiofilm Activity againstPseudomonas aeruginosaAntimicrobial Agents and Chemotherapy, 2008