Nano Al2O3 Oranının Ni-Co Matrisli Nano Kompozit Kaplamaların Tribolojik Özelliklerine Etkisi
- 3 August 2018
- journal article
- Published by Academic Platform Journal of Engineering and Smart Systems in Academic Platform Journal of Engineering and Smart Systems
- Vol. 6 (2), 116-123
- https://doi.org/10.21541/apjes.396514
Abstract
Due to the micro-electrical mechanical system (MEMS) and Nano-electrical mechanical system (MEMS) usage potential, Ni-Co based nanocomposite coatings have been remarkable. Especially, they are promises to solve tribological problem of MEMS and NEMS system. Therefore, Ni-Co alloy and Ni-Co/ Al2O3 composite coatings were prepared from a modified Watt's type electrolyte by Direct Current (DC) with 7A/dm2 current density and four different amounts of Al2O3 added to electrolyte concentration. Effect of amount of Al2O3 in the Ni-Co matrix on mechanical and physical properties were investigated. Produced composite coating layers structure were characterized with scanning electron microscopy (SEM) and X-ray diffraction (XRD). Mechanical properties were determined with Vickers microhardness test method. Tribological properties was carried out with reciprocating pin on disk system. As a result of investigation and characterization best mechanical and tribological properties were achieved with 1 g/l Al2O3 addition into electrolyte and at PRC current type.Keywords
This publication has 18 references indexed in Scilit:
- Comparison microstructure and sliding wear properties of nickel–cobalt/CNT composite coatings by DC, PC and PRC current electrodepositionApplied Surface Science, 2015
- The chemistry and structure of nickel–tungsten coatings obtained by pulse galvanostatic electrodepositionElectrochimica Acta, 2012
- Friction and sliding wear behaviour of electrodeposited cobalt and cobalt–tungsten alloy coatings for replacement of electrodeposited chromiumWear, 2009
- Pulse reverse plating of Ni–Co alloys: Deposition kinetics of Watts, sulfamate and chloride electrolytesElectrochimica Acta, 2006
- MEMS and NEMS - systems, devices, and structuresIEEE Electrical Insulation Magazine, 2004
- Wear characterization of electrodeposited Ni–WC composite coatingsTribology International, 2004
- Structure and magnetic properties of nanocrystalline Co–Ni and Co–Fe mechanically alloyedMaterials Letters, 2003
- Development of electroplated magnetic materials for MEMSJournal of Magnetism and Magnetic Materials, 2003
- Electrodeposition of nickelcobalt alloys: the effect of process parameters on energy consumptionMinerals Engineering, 2001
- Electrochemically deposited thin film alloys for ULSI and MEMS applicationsMicroelectronic Engineering, 2000