Exterior Wood-Frame Walls—Wind–Vapour Barrier Ratio in Denmark
Open Access
- 23 September 2021
- Vol. 11 (10), 428
- https://doi.org/10.3390/buildings11100428
Abstract
Wood-frame walls in cold climates are traditional constructed with a vapour barrier that also constitutes the air-tightness layer. Polyethylene foil as a vapour barrier is likely used; however, other building materials can be used to obtain correspondingly sufficient properties. 1D hygrothermal simulations were conducted for a wood-frame structure to investigate the wind–vapour barrier ratio, and if the vapour barrier of polyethylene foil could be omitted and replaced by other materials. The results were postprocessed using the VTT mould model. The results showed how wood-frame walls can be designed with respect to internal humidity class and diffusion resistance divided into three categories: no risk for mould growth, needs further investigation, and is not performing well as the risk for mould growth is present. For internal humidity classes 1–3, the ratio between wind and vapour barrier must be about 1:5, and 1:10 for classes 4 and 5 to be on the safe side. Simulations were performed for the climate of Lund, Sweden, which were used to simulate climate in Denmark too. Nevertheless, the results are related to climate data and, thus, the location.This publication has 14 references indexed in Scilit:
- Hygrothermal performance of cold ventilated attics above different horizontal ceiling constructions – Field surveyJournal of Affective Disorders, 2019
- Parametric study on the hygrothermal performance of timber frame walls with external airtightness membranes in a temperate maritime climateMATEC Web of Conferences, 2019
- Moisture supply in Danish single-family houses – the influence of building styleEnergy Procedia, 2017
- Moisture supply in Danish single-family houses – the influence of occupant behavior and type of roomEnergy Procedia, 2017
- The effect of thermal transmittance of building envelope and material selection of wind barrier on moisture safety of timber frame exterior wallJournal of Building Engineering, 2016
- Mold Risk Classification Based on Comparative Evaluation of Two Established Growth ModelsEnergy Procedia, 2015
- Hygrothermal risks of using exterior air barrier systems for highly insulated light weight walls: A laboratory investigationJournal of Affective Disorders, 2012
- Investigation of interior post-insulated masonry walls with wooden beam endsJournal of Building Physics, 2012
- Moisture transport through perforated vapour retardersJournal of Affective Disorders, 2009
- Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed BuildingsMitigation and Adaptation Strategies for Global Change, 2006