Measurement of 1–10 Hz 3D vibration modes with a CT-scanner
Open Access
- 20 April 2020
- journal article
- Published by Springer Science and Business Media LLC in Advanced Modeling and Simulation in Engineering Sciences
- Vol. 7 (1), 1-18
- https://doi.org/10.1186/s40323-020-00155-4
Abstract
A new in situ vibration mode measurement method within a tomograph is proposed based on Projection-based Digital Volume Correlation techniques. Several projection angles are selected and a large number of radiographs of the vibrating sample are acquired at random instants with a small exposure time in order to ‘freeze out’ the displacement and avoid motion blurring. Based on an initial reconstruction acquired in a static configuration, the displacement field measurement is performed using a Proper Generalized Decomposition technique. All projections are analyzed as being due to a few vibration modes deforming the known reference volume. The different projection directions are related to each other assuming that the modal amplitude probability distribution functions are statistically similar. A synthetic test case, mock-up of a liver, is used to illustrate and validate the approach. In this case, 5 projection angles were chosen, 300 radiographs per angle, and the first three vibration modes could be recovered with a good accuracy.Keywords
This publication has 40 references indexed in Scilit:
- Concurrent optimization of material spatial distribution and material anisotropy repartition for two-dimensional structuresContinuum Mechanics and Thermodynamics, 2018
- Motion microscopy for visualizing and quantifying small motionsProceedings of the National Academy of Sciences of the United States of America, 2017
- Improving full-field identification using progressive model enrichmentsInternational Journal of Solids and Structures, 2017
- Virtual hybrid test control of sinuous crackJournal of the Mechanics and Physics of Solids, 2017
- A complex mixed-mode crack propagation test performed with a 6-axis testing machine and full-field measurementsEngineering Fracture Mechanics, 2017
- Estimation of Elastoplastic Parameters via Weighted FEMU and Integrated-DICExperimental Mechanics, 2014
- Quantitative X-ray tomographyInternational Materials Reviews, 2013
- Computation of full-field displacements in a scaffold implant using digital volume correlation and finite element analysisMedical Engineering & Physics, 2013
- Contribution of heterogeneous strain field measurements and boundary conditions modelling in inverse identification of material parametersEuropean Journal of Mechanics - A/Solids, 2011
- 3D digital image correlation methods for full-field vibration measurementMechanical Systems and Signal Processing, 2011