Narrow band-gap materials with overlapping absorption simultaneously increase the open circuit voltage and average visible transmittance of semitransparent organic solar cells
- 23 January 2021
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 9 (9), 5711-5719
- https://doi.org/10.1039/d0ta11203h
Abstract
Most semitransparent organic solar cells (ST-OSCs) show a low open-circuit voltage (VOC) because of the inherent narrow band-gap of the active layer materials, which is proven to be a key limitation for the improvement of the device performance. To obtain a high VOC, wide-band gap polymer donors, such as PM6 are often selected for ST-OSCs, but the absorption in the visible light region of such wide-band gap polymer donors is not conducive to the transparency of the devices. Therefore, rational design of active materials to improve the VOC and device efficiency without sacrificing transparency is critical to realize ST-OSCs for practical applications. Herein, we propose a new design concept of combination of donors and acceptors with low energy levels and overlapping near-infrared absorption for high performance ST-OSCs. We incorporate chlorine, sulfur and fluorine functional atoms into the polymer PCE10 to down-shift the energy levels of the resulting polymer donors, namely PCE10-2Cl, PCE10-SF and PCE10-2F, respectively. All these functionalized polymer donors show lower energy levels than PCE10, ensuring a significantly higher VOC. Especially, the narrow band-gap PCE10-2Cl having overlapping absorption with the non-fullerene acceptor IT-4F not only obtains a remarkably improved VOC, but also achieves a comparable photocurrent to the blends with complementary absorption. Subsequently, the PCE10-2Cl:IT-4F-based device delivers a champion power conversion efficiency (PCE) of 10.72% among the functionalized PCE10-based devices. For the ST-OSC device with PCE10-2Cl:IT-4F, a PCE of 8.25% with an average visible transmittance (AVT) of 33% is achieved without any extra treatment, which is an outstanding performance of ST-OSCs with an AVT of over 30%. These results indicate that a rational combination of narrow band-gap donors and acceptors with overlapping absorption is a promising strategy to fabricate high performance ST-OSCs.Keywords
Funding Information
- National Natural Science Foundation of China (51973087, 51673092, 21762029)
This publication has 40 references indexed in Scilit:
- Harvesting the Full Potential of Photons with Organic Solar CellsAdvanced Materials, 2015
- An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar CellsAdvanced Materials, 2015
- Fullerene Derivative‐Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low‐Bandgap Polymer (PTB7‐Th) for High PerformanceAdvanced Materials, 2013
- High-performance semi-transparent polymer solar cells possessing tandem structuresEnergy & Environmental Science, 2013
- A Versatile Fluoro‐Containing Low‐Bandgap Polymer for Efficient Semitransparent and Tandem Polymer Solar CellsAdvanced Functional Materials, 2013
- Efficiency of bulk-heterojunction organic solar cellsProgress in Polymer Science, 2013
- Polymer solar cellsNature Photonics, 2012
- Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad AbsorptionAccounts of Chemical Research, 2012
- Polymer‐Fullerene Bulk‐Heterojunction Solar CellsAdvanced Materials, 2009
- Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor HeterojunctionsScience, 1995