Mechanical Properties of Phormium Tenax Reinforced Natural Rubber Composites
Open Access
- 31 January 2021
- Vol. 9 (2), 11
- https://doi.org/10.3390/fib9020011
Abstract
The introduction of natural fibers as a filler in a natural rubber (NR) matrix can be of relevance for their eco-friendly and sustainable nature as the substitute for carbon-based fillers. In this work, short Phormium tenax fibers were introduced in random orientation into a NR matrix in different lengths (6, 10, and 14 mm) and various amounts (10, 20, and 30%, taking 100 as the NR weight). The composite was fabricated using a two-roll mill according to American Society for Testing and Materials (ASTM) D3184-11 standard. Several properties were determined, namely tensile and tear characteristics, hardness, and abrasion resistance. The results suggest that the shortest fiber length used, 6 mm, offered the best combination between loss of mechanical (tensile and tear) properties and hardness and the most acceptable resistance to abrasion, with the properties increasing with the amount of fibers present in NR. As a consequence, it is indicated that a higher amount of fibers could be possibly introduced, especially to achieve harder composites, though this would require a more controlled mixing process not excessively reducing tensile elongation at break.This publication has 39 references indexed in Scilit:
- Thermal and mechanical characterisation of Phormium tenax-reinforced polypropylene compositesJournal of Thermoplastic Composite Materials, 2013
- Fibre cross-section determination and variability in sisal and flax and its effects on fibre performance characterisationComposites Science and Technology, 2011
- Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibersMaterials & Design (1980-2015), 2010
- Nanostructured fly ash–styrene butadiene rubber hybrid nanocompositesPolymer Composites, 2008
- Utilization of bowstring hemp fiber as a filler in natural rubber compoundsJournal of Applied Polymer Science, 2007
- Reinforcement of natural rubber with silica/carbon black hybrid fillerPolymer Testing, 2007
- Performance of pineapple leaf fiber–natural rubber composites: The effect of fiber surface treatmentsJournal of Applied Polymer Science, 2006
- Water Sorption Studies of Hybrid Biofiber-Reinforced Natural Rubber BiocompositesBiomacromolecules, 2005
- Influence of fiber volume fraction and aspect ratio in resol–sisal compositesJournal of Applied Polymer Science, 2003
- Self-vulcanizable rubber blend system based on epoxidized natural rubber and carboxylated nitrile rubberJournal of Polymer Science Part C: Polymer Letters, 1989