High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization
Open Access
- 15 December 2020
- Vol. 25 (24), 5951
- https://doi.org/10.3390/molecules25245951
Abstract
In this study, poly(lactic acid) (PLA)/starch blends were prepared through reactive melt blending by using PLA and starch as raw materials and vegetable oil polyols, polyethylene glycol (PEG), and citric acid (CA) as additives. The effects of CA and PEG on the toughness of PLA/starch blends were analyzed using a mechanical performance test, scanning electron microscope analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy, X-ray diffraction, rheological analysis, and hydrophilicity test. Results showed that the elongation at break and impact strength of the PLA/premixed starch (PSt)/PEG/CA blend were 140.51% and 3.56 kJ·m−2, which were 13.4 and 1.8 times higher than those of pure PLA, respectively. The essence of the improvement in the toughness of the PLA/PSt/PEG/CA blend was the esterification reaction among CA, PEG, and starch. During the melt-blending process, the CA with abundant carboxyl groups reacted in the amorphous region of the starch. The shape and crystal form of the starch did not change, but the surface activity of the starch improved and consequently increased the adhesion between starch and PLA. As a plasticizer for PLA and starch, PEG effectively enhanced the mobility of the molecular chains. After PEG was dispersed, it participated in the esterification reaction of CA and starch at the interface and formed a branched/crosslinked copolymer that was embedded in the interface of PLA and starch. This copolymer further improved the compatibility of the PLA/starch blends. PEGs with small molecules and CA were used as compatibilizers to reduce the effect on PLA biodegradability. The esterification reaction on the starch surface improved the compatibilization and toughness of the PLA/starch blend materials and broadens their application prospects in the fields of medicine and high-fill packaging.This publication has 41 references indexed in Scilit:
- Preparation and characterization of dry method esterified starch/polylactic acid composite materialsInternational Journal of Biological Macromolecules, 2013
- Novel toughening mechanism for polylactic acid (PLA)/starch blends with layer-like microstructure via pressure-induced flow (PIF) processingMaterials Letters, 2013
- Development of biodegradable flexible films of starch and poly(lactic acid) plasticized with adipate or citrate estersCarbohydrate Polymers, 2013
- Poly(Ethylene Glycol) as a Compatibilizer for Poly(Lactic Acid)/Thermoplastic Starch BlendsJournal of Polymers and the Environment, 2012
- Preparation of modified starch‐grafted poly(lactic acid) and a study on compatibilizing efficacy of the copolymers in poly(lactic acid)/thermoplastic starch blendsJournal of Applied Polymer Science, 2012
- Isothermal crystallization kinetics of thermoplastic starch/poly(lactic acid) compositesCarbohydrate Polymers, 2011
- Effect of Glycerin and Starch Crosslinking on Molecular Compatibility of Biodegradable Poly(lactic acid)-Starch CompositesJournal of Polymers and the Environment, 2011
- Effects of Water on the Properties of Thermoplastic Starch Poly(lactic acid) Blend Containing Citric AcidJournal of Thermoplastic Composite Materials, 2010
- Effects of Water on the Properties of Thermoplastic Starch Poly(lactic acid) Blend Containing Citric AcidJournal of Thermoplastic Composite Materials, 2009
- Starch Nanocrystals with Large Chain Surface ModificationsLangmuir, 2006