Efficient perovskite solar cells via improved carrier management
- 24 February 2021
- journal article
- research article
- Published by Springer Science and Business Media LLC in Nature
- Vol. 590 (7847), 587-593
- https://doi.org/10.1038/s41586-021-03285-w
Abstract
Metal halide perovskite solar cells (PSCs) are an emerging photovoltaic technology with the potential to disrupt the mature silicon solar cell market. Great improvements in device performance over the past few years, thanks to the development of fabrication protocols1,2,3, chemical compositions4,5 and phase stabilization methods6,7,8,9,10, have made PSCs one of the most efficient and low-cost solution-processable photovoltaic technologies. However, the light-harvesting performance of these devices is still limited by excessive charge carrier recombination. Despite much effort, the performance of the best-performing PSCs is capped by relatively low fill factors and high open-circuit voltage deficits (the radiative open-circuit voltage limit minus the high open-circuit voltage)11. Improvements in charge carrier management, which is closely tied to the fill factor and the open-circuit voltage, thus provide a path towards increasing the device performance of PSCs, and reaching their theoretical efficiency limit12. Here we report a holistic approach to improving the performance of PSCs through enhanced charge carrier management. First, we develop an electron transport layer with an ideal film coverage, thickness and composition by tuning the chemical bath deposition of tin dioxide (SnO2). Second, we decouple the passivation strategy between the bulk and the interface, leading to improved properties, while minimizing the bandgap penalty. In forward bias, our devices exhibit an electroluminescence external quantum efficiency of up to 17.2 per cent and an electroluminescence energy conversion efficiency of up to 21.6 per cent. As solar cells, they achieve a certified power conversion efficiency of 25.2 per cent, corresponding to 80.5 per cent of the thermodynamic limit of its bandgap.This publication has 49 references indexed in Scilit:
- Synproportionation Reaction for the Fabrication of Sn2+ Self-Doped SnO2-x Nanocrystals with Tunable Band Structure and Highly Efficient Visible Light Photocatalytic ActivityThe Journal of Physical Chemistry C, 2013
- Sequential deposition as a route to high-performance perovskite-sensitized solar cellsNature, 2013
- Engineering of Facets, Band Structure, and Gas‐Sensing Properties of Hierarchical Sn2+‐Doped SnO2 NanostructuresAdvanced Functional Materials, 2013
- Effects of oxygen vacancies on the electrochemical performance of tin oxideJournal of Materials Chemistry A, 2012
- Peptide-Induced Formation of Crystalline Sn6O4(OH)4 Nanoparticles under Ambient ConditionsBulletin of the Chemical Society of Japan, 2012
- Facile Synthesis of Tin Oxide Nanoflowers: A Potential High-Capacity Lithium-Ion-Storage MaterialLangmuir, 2009
- Reciprocity relation between photovoltaic quantum efficiency and electroluminescent emission of solar cellsPhysical Review B, 2007
- Synthesis of SnO2 nanoparticles through the controlled precipitation routeMaterials Chemistry and Physics, 2007
- Selective Preparation of SnO2 and SnO Crystals with Controlled Morphologies in an Aqueous Solution SystemCrystal Growth & Design, 2006
- Solution Chemistry and Colloid Formation in the Tin Chloride Sensitizing ProcessJournal of the Electrochemical Society, 1972