Fabrication of Textured Porous Ti3SiC2 by Slip Casting under High Magnetic Field and Microstructural Evolution through High Temperature Deformation
- 1 July 2021
- journal article
- research article
- Published by Japan Institute of Metals in Journal of the Japan Institute of Metals and Materials
- Vol. 85 (7), 256-263
- https://doi.org/10.2320/jinstmet.j2021001
Abstract
To clarify the effect of constraint conditions on the kink formation, fabrication process of the texture and porosity controlled Ti3SiC2 polycrystals was investigated and microstructural evolution during high temperature deformation was examined in it under high temperature uniaxial compression tests at 1200℃. Dense textured Ti3SiC2 sintered body was fabricated by slip casting in the high magnetic field of 12 T and following pressureless sintering at 1400℃ for 1 h. The porosity of the textured Ti3SiC2 was controlled by dispersing polymethyl methacrylate (PMMA) particles into the textured Ti3SiC2 as a spacer media. The highly textured Ti3SiC2 polycrystals with porosity of 8.4 vol% and 16.7 vol%, respectively, were successfully fabricated by the slip casting in the high magnetic field. After the high temperature uniaxial compression perpendicular to the c-axis of the textured structure, both the porous and dense Ti3SiC2 showed kink formation, which is a common deformation mode for anisotropic layered materials. However, the average rotation angles of the kink boundaries were higher in the porous specimen than in the dense specimen. Since the crystal rotation is necessary for the kink formation, kink bands would be preferably developed in the porous area due to its weaker constraint than in the dense area. It can be concluded from the microstructural analysis that the constrain factor caused by the neighbor grains affects the crystalline rotation, resulting in the kink boundary formation with different rotation angles.Keywords
This publication has 18 references indexed in Scilit:
- Crystallographic classification of kink bands in an extruded Mg–Zn–Y alloy using intragranular misorientation axis analysisActa Materialia, 2013
- Mechanics of kink-bands during torsion deformation of muscovite aggregateTectonophysics, 2012
- Tailoring Ti3SiC2 Ceramic via a Strong Magnetic Field Alignment Method Followed by Spark Plasma SinteringJournal of the American Ceramic Society, 2010
- Analysis of Uni-Axial Alignment Behavior of Nonmagnetic Materials under Static Magnetic Field with Sample RotationJournal of the Japan Institute of Metals and Materials, 2007
- Synthesis and Characterization of a Metallic Ceramic Material–Ti3SiC2MATERIALS TRANSACTIONS, 2006
- Microstructure and mechanical properties of porous Ti3SiC2Acta Materialia, 2005
- Fabrication of oriented ?-alumina from porous bodies by slip casting in a high magnetic fieldSolid State Ionics, 2004
- Preferred Orientation of the Texture in the SiC Whisker-Dispersed Al2O3 Ceramics by Slip Casting in a High Magnetic Field.Journal of the Ceramic Society of Japan, 2001
- Layered machinable ceramics for high temperature applicationsScripta Materialia, 1997
- Synthesis and Characterization of a Remarkable Ceramic: Ti3SiC2Journal of the American Ceramic Society, 1996