Recycling of Titanium Alloy Powders and Swarf through Continuous Extrusion (ConformTM) into Affordable Wire for Additive Manufacturing
Open Access
- 25 June 2020
- Vol. 10 (6), 843
- https://doi.org/10.3390/met10060843
Abstract
Over the last 20 years, there has been growing research and development investment to exploit the benefits of wire deposition additive manufacturing (AM) for the production of near-net shape components in aircraft and space applications. The wire feedstock for these processes is a significant part of the overall process costs, especially for high-value materials such as alloyed titanium. Powders for powder-based AM have tight specifications regarding size and morphology, resulting in a significant amount of waste during the powder production. In the aerospace sector, up to 95% of forged billet can be machined away, and with increasing aircraft orders, stockpiles of such machining swarf are increasing. In this study, the continuous extrusion process—ConformTM—was employed to consolidate waste titanium alloy feedstocks in the forms of gas atomised powder and machining swarf into wire. Samples of wire were further cold-drawn down to 40% reduction, using conventional wiredrawing equipment. As close to 100% of the waste powder can be converted to wire by using the ConformTM process. This technology offers an attractive addition to the circular economy for manufacturers and, with further development, could be an important addition as industries move toward more sustainable supply chains.Keywords
This publication has 20 references indexed in Scilit:
- Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain Exploring the production and supply of metal powders for AM processesJohnson Matthey Technology Review, 2015
- Characterization of Metal Powders Used for Additive ManufacturingJournal of Research of the National Institute of Standards and Technology, 2014
- A Comparison Between ECAP and Conventional Extrusion for Consolidation of Aluminum Metal Matrix CompositeJournal of Materials Engineering and Performance, 2011
- Enhancing Ductility of ECAP Processed MetalsMaterials Science Forum, 2010
- Characterisation of Conform™ and conventionally extruded Al–4Mg–1Zr. Effect of extrusion route on superplasticityJournal of Materials Science, 2010
- Principles of ECAP–Conform as a continuous process for achieving grain refinement: Application to an aluminum alloyActa Materialia, 2010
- Densification and Conolidation of Powders by Equal Channel Angular PressingMaterials Science Forum, 2007
- Review: Processing of metals by equal-channel angular pressingJournal of Materials Science, 2001
- Conform and the recycling of non-ferrous scrap metalsConservation & Recycling, 1978
- Conform—A New Concept for the Continuous Extrusion Forming of MetalsJournal of Engineering for Industry, 1974