Temperature Distribution in Insulated Temperature-Controlled Container by Numerical Simulation
Open Access
- 11 September 2020
- Vol. 13 (18), 4765
- https://doi.org/10.3390/en13184765
Abstract
Cold-storage containers are widely used in cold-chain logistics transportation due to their energy saving, environmental protection, and low operating cost. The uniformity of temperature distribution is significant in agricultural-product storage and transportation. This paper explored temperature distribution in the container by numerical simulation, which included ventilation velocity and the fan location. Numerical model/numerical simulation showed good agreement with experimental data in terms of temporal and spatial air temperature distribution. Results showed that the cooling rate improved as velocity increased, and temperature at 45 min was the lowest, when velocity was 16 m/s. Temperature-distribution uniformity in the compartment became worse with the increase in ventilation velocity, but its lowest temperature decreased with a velocity increase. With regard to fan energy consumption, the cooling rate of the cooling module, and temperature-field distribution in the product area, velocity of 12 m/s was best. Temperature standard deviation and nonuniformity coefficient in the container were 0.87 and 2.1, respectively, when fans were located in the top four corners of the container. Compared with before, the average temperature in the box was decreased by 0.12 °C, and the inhomogeneity coefficient decreased by more than twofold. The results of this paper provide a better understanding of temperature distribution in cold-storage containers, which helps to optimize their structure and parameters.Keywords
Funding Information
- National Natural Science Foundation of China (31971806, 31901736)
- Natural Science Foundation of Guangdong Province (2020A1515010967)
This publication has 44 references indexed in Scilit:
- Time–Temperature Management Along the Food Cold Chain: A Review of Recent DevelopmentsComprehensive Reviews in Food Science and Food Safety, 2017
- Thermal conductivity enhancement of phase change materials for thermal energy storage: A reviewRenewable and Sustainable Energy Reviews, 2016
- A refrigerated container envelope with a PCM (Phase Change Material) layer: Experimental and theoretical investigation in a representative town in Central ItalyEnergy Conversion and Management, 2016
- Computer simulation with TRNSYS for a mobile refrigeration system incorporating a phase change thermal storage unitApplied Energy, 2014
- Phase change materials for thermal energy storageProgress in Materials Science, 2014
- Active phase change material package for thermal protection of ice cream containersInternational Journal of Refrigeration, 2012
- Thermal analysis of a low temperature storage unit using phase change materials without refrigeration systemInternational Journal of Refrigeration, 2012
- Development of a novel refrigeration system for refrigerated trucks incorporating phase change materialApplied Energy, 2011
- Review on thermal energy storage with phase change materials (PCMs) in building applicationsApplied Energy, 2011
- Reducing heat transfer across the insulated walls of refrigerated truck trailers by the application of phase change materialsEnergy Conversion and Management, 2009