Modelling and Simulation of Integrated Topology of DC/DC converter for LED Driver Circuit
- 7 May 2020
- journal article
- Published by World Scientific and Engineering Academy and Society (WSEAS) in WSEAS TRANSACTIONS ON ELECTRONICS
- Vol. 11, 18-21
- https://doi.org/10.37394/232017.2020.11.3
Abstract
With the increase in technological advancements and impetus to work for the reduction of electrical energy consumption among different types of consumers, there is a primary need to take into account all forms of energy efficiency improvement methods available for electric and electronic equipment been used. It has been noticed that in commercial lighting, in terms of efficiency light-lamps based on light-emitting diodes(LEDs) are far better as compared to those where traditional high pressure sodium (HPS) lamps which are still in use in major underdeveloped and developing areas worldwide in specifically street lighting. The LED have numerous advantages such as high luminous efficiency, life span and it has no mercury in its composition. Therefore, recently researchers of this area has been setting a goal to utilize LED as a good alternative to save electricity from major parts of this planet. In this paper simulation of LED driver circuit is presented to utilize the 12 V LED lighting strip which has been used in Indian hawkers/small shopkeepers since a long time.Keywords
This publication has 14 references indexed in Scilit:
- Buck–Boost–Buck-Type Single-Switch Multistring Resonant LED Driver With High Power Factor and Passive Current BalancingIEEE Transactions on Power Electronics, 2019
- A More Efficient PFC Single-Coupled-Inductor Multiple-Output Electrolytic Capacitor-Less LED Driver With Energy-Flow-Path OptimizationIEEE Transactions on Power Electronics, 2018
- Single-Stage LED Driver Achieves Electrolytic Capacitor-Less and Flicker-Free Operation With Unidirectional Current CompensatorIEEE Transactions on Power Electronics, 2018
- A Bridgeless Electrolytic Capacitor-Free LED Driver Based on Series Resonant Converter With Constant Frequency ControlIEEE Transactions on Power Electronics, 2018
- A PFC Single-Coupled-Inductor Multiple-Output LED Driver Without Electrolytic CapacitorIEEE Transactions on Power Electronics, 2018
- A Two-Stage Quasi-Resonant Dual-Buck LED Driver With Digital Control MethodIEEE Transactions on Industry Applications, 2017
- Sine-Reference Band (SRB)-Controlled Average Current Technique for Phase-Cut Dimmable AC–DC Buck LED Lighting Driver Without Electrolytic CapacitorIEEE Transactions on Power Electronics, 2017
- A High-Efficiency Single-Inductor Multiple-Output Buck-Type LED Driver With Average Current Correction TechniqueIEEE Transactions on Power Electronics, 2017
- An Electrolytic Capacitor-Less High Power Factor LED Driver Based on a “One-and-a-Half Stage” Forward-Flyback TopologyIEEE Transactions on Power Electronics, 2017
- High-Performance Current-Mode-Controller Design of Buck LED Driver With Slope CompensationIEEE Transactions on Power Electronics, 2017