Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle
Open Access
- 12 February 2020
- journal article
- research article
- Published by IOP Publishing in Biofabrication
- Vol. 12 (2), 025022
- https://doi.org/10.1088/1758-5090/ab7553
Abstract
Systematic analysis of the extrusion process in 3D bioprinting is mandatory for process optimization concerning production speed, shape fidelity of the 3D construct and cell viability. In this study, we applied numerical and analytical modelling to describe the fluid flow inside the printing head based on a Herschel-Bulkley model. The presented analytical calculation method nicely reproduces the results of Computational Fluid Dynamics (CFD) simulation concerning pressure drop over the printing head and maximal shear parameters at the outlet. An approach with dimensionless flow parameter enables the user to adapt rheological characteristics of a bioink, the printing pressure and needle diameter with regard to processing time, shear sensitivity of the integrated cells, shape fidelity and strand dimension. Bioinks consist of a blend of polymers and cells, which lead to a complex fluid behavior. In the present study, a bioink containing alginate, methylcellulose and agarose (AMA) was used as experimental model to compare the calculated with the experimental pressure gradient. With cultures of an immortalized human mesenchymal stem cell line and plant cells (basil) it was tested how cells influence the flow and how mechanical forces inside the printing needle affect cell viability. Influences on both sides increased with cell (aggregation) size as well as a less spherical shape. This study contributes to a systematic description of the extrusion-based bioprinting process and introduces a general strategy for process design, transferable to other bioinks.Keywords
Funding Information
- European Social Fund (young researchers group)
- Deutsche Forschungsgemeinschaft (FR 912/40-1)
This publication has 44 references indexed in Scilit:
- Rheological and flow modelling of viscoelastic fluids between eccentric cylindersApplied Mathematical Modelling, 2011
- Modeling Process-Induced Cell Damage in the Biodispensing ProcessTissue Engineering, Part C: Methods, 2010
- Frequent Amplification of a chr19q13.41 MicroRNA Polycistron in Aggressive Primitive Neuroectodermal Brain TumorsCancer Cell, 2009
- Characterization of cell viability during bioprinting processesBiotechnology Journal, 2009
- Rheological Properties of Cell-Hydrogel Composites Extruding Through Small-Diameter TipsJournal of Manufacturing Science and Engineering, 2008
- Effects of Dispensing Pressure and Nozzle Diameter on Cell Survival from Solid Freeform Fabrication–Based Direct Cell WritingTissue Engineering, Part A, 2008
- Mechanical Cell InjuryAnnals of the New York Academy of Sciences, 2006
- Investigations of cell immobilization in alginate: rheological and electrostatic extrusion studiesJournal of Chemical Technology & Biotechnology, 2006
- Measuring the Flow Properties of Yield Stress FluidsAnnual Review of Fluid Mechanics, 1992
- On the formulation of rheological equations of stateProceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences, 1950