Low-Cost Unattended Design of Miniaturized 4 × 4 Butler Matrices with Nonstandard Phase Differences
Open Access
- 27 January 2021
- Vol. 21 (3), 851
- https://doi.org/10.3390/s21030851
Abstract
Design of Butler matrices dedicated to Internet of Things and 5th generation (5G) mobile systems—where small size and high performance are of primary concern—is a challenging task that often exceeds capabilities of conventional techniques. Lack of appropriate, unified design approaches is a serious bottleneck for the development of Butler structures for contemporary applications. In this work, a low-cost bottom-up procedure for rigorous and unattended design of miniaturized 4 × 4 Butler matrices is proposed. The presented approach exploits numerical algorithms (governed by a set of suitable objective functions) to control synthesis, implementation, optimization, and fine-tuning of the structure and its individual building blocks. The framework is demonstrated using two miniaturized matrices with nonstandard output-port phase differences. Numerical results indicate that the computational cost of the design process using the presented framework is over 80% lower compared to the conventional approach. The footprints of optimized matrices are only 696 and 767 mm2, respectively. Small size and operation frequency of around 2.6 GHz make the circuits of potential use for mobile devices dedicated to work within a sub-6 GHz 5G spectrum. Both structures have been benchmarked against the state-of-the-art designs from the literature in terms of performance and size. Measurements of the fabricated Butler matrix prototype are also provided.Keywords
This publication has 48 references indexed in Scilit:
- A High-Performance Transmitarray Antenna with Thin Metasurface for 5G Communication Based on PSO (Particle Swarm Optimization)Sensors, 2020
- Integrated LTE and Millimeter-Wave 5G MIMO Antenna System for 4G/5G Wireless TerminalsSensors, 2020
- A Conformal Circularly Polarized Series-Fed Microstrip Antenna Array DesignIEEE Transactions on Antennas and Propagation, 2019
- A Beam-Shaping Feeding Network in Series Configuration for Antenna Array With Cosecant-Square Pattern and Low SidelobesIEEE Antennas and Wireless Propagation Letters, 2019
- On Alternative Approaches to Design of Corporate Feeds for Low-Sidelobe Microstrip Linear ArraysIEEE Transactions on Antennas and Propagation, 2018
- Systematic approach to sidelobe reduction in linear antenna arrays through corporate‐feed‐controlled excitationIET Microwaves, Antennas & Propagation, 2017
- A Switchable 3-D-Coverage-Phased Array Antenna Package for 5G Mobile TerminalsIEEE Antennas and Wireless Propagation Letters, 2016
- Design of a Low-Profile Dual-Polarized Stepped Slot Antenna Array for Base StationIEEE Antennas and Wireless Propagation Letters, 2015
- Broadband Circularly Polarized Slot Antenna Array Using Sequentially Rotated Technique for $C$-Band ApplicationsIEEE Antennas and Wireless Propagation Letters, 2013
- High-Efficiency Angled-Dipole Antennas for Millimeter-Wave Phased Array ApplicationsIEEE Transactions on Antennas and Propagation, 2008