Silane Modification of Starch-Based Wood Adhesive: Review
Open Access
- 1 January 2019
- journal article
- research article
- Published by Scientific Research Publishing, Inc. in Open Journal of Polymer Chemistry
- Vol. 09 (03), 53-62
- https://doi.org/10.4236/ojpchem.2019.93005
Abstract
Currently there has been a growing interest in substituting traditional synthetic polymers with biobased renewable polymers for adhesive applications. However, biobased renewable polymers such as starch suffer from few draw-backs like poor water resistance and mechanical strength. To become important potential alternatives of synthetic polymers, starch must have comparable physical, chemical, thermal and mechanical properties to that of synthetic polymers. To achieve this, starch has been modified by a series of crosslinkers like boric acid, citric acid, glyoxal, gluteraldehyde, etc. and silane modification. Silane modification by chloropropyl trimethoxysilane, γ-Methacryloxypropyl trimethoxy silane and vinyl trimethoxy silane is a suitable method to improve the performance in terms of mechanical and thermally. Silane forms covalent bonds with starch during starch modification resulted in enhanced shear strength and storage stability. A new research on biodegradable, renewable, environmentally friendly silane modification of starch-based wood adhesive that was prepared by reacting with various silanes. This paper, we reviewed silane as a modifying agent for starch-based wood adhesive.Keywords
This publication has 57 references indexed in Scilit:
- Evaluation of mechanical and physical properties of industrial particleboard bonded with a corn flour–urea formaldehyde adhesiveComposites Part B: Engineering, 2013
- Fabrication and Physico-Chemical Properties of High-Performance Pine Needles/Green Polymer CompositesInternational Journal of Polymeric Materials and Polymeric Biomaterials, 2013
- Photo-oxidation of rice starch. Part I: Using hydrogen peroxideCarbohydrate Polymers, 2010
- Starch graft copolymers as superabsorbents obtained via reactive extrusion processingPJCT, 2010
- High Carbonyl Content Oxidized Starch Prepared by Hydrogen Peroxide and Its Thermoplastic ApplicationStarch ‐ Stärke, 2009
- Kinetics of hydrolysis and self condensation reactions of silanes by NMR spectroscopyColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- Starch‐graft‐(synthetic copolymer) latexes initiated with Ce4+ and stabilized by amylopectinJournal of Polymer Science Part A: Polymer Chemistry, 2007
- Modified Corn Starches with Improved Comprehensive Properties for Preparing ThermoplasticsStarch ‐ Stärke, 2007
- In situ polymerization of starch with lactic acid in aqueous solution and the microstructure characterizationCarbohydrate Polymers, 2006
- Starch- and Dextrin-Based AdhesivesPublished by American Chemical Society (ACS) ,1989