Ultrasound‐Powered Implants: A Critical Review of Piezoelectric Material Selection and Applications
- 8 July 2021
- journal article
- review article
- Published by Wiley in Advanced Healthcare Materials
- Vol. 10 (17), 2100986
- https://doi.org/10.1002/adhm.202100986
Abstract
Ultrasound-powered implants (UPIs) represent cutting edge power sources for implantable medical devices (IMDs), as their powering strategy allows for extended functional lifetime, decreased size, increased implant depth, and improved biocompatibility. IMDs are limited by their reliance on batteries. While batteries proved a stable power supply, batteries feature relatively large sizes, limited life spans, and toxic material compositions. Accordingly, energy harvesting and wireless power transfer (WPT) strategies are attracting increasing attention by researchers as alternative reliable power sources. Piezoelectric energy scavenging has shown promise for low power applications. However, energy scavenging devices need be located near sources of movement, and the power stream may suffer from occasional interruptions. WPT overcomes such challenges by more stable, on-demand power to IMDs. Among the various forms of WPT, ultrasound powering offers distinct advantages such as low tissue-mediated attenuation, a higher approved safe dose (720 mW cm−2), and improved efficiency at smaller device sizes. This study presents and discusses the state-of-the-art in UPIs by reviewing piezoelectric materials and harvesting devices including lead-based inorganic, lead-free inorganic, and organic polymers. A comparative discussion is also presented of the functional material properties, architecture, and performance metrics, together with an overview of the applications where UPIs are being deployed.Keywords
Funding Information
- National Science Foundation (EEC1160483)
- Science Foundation Ireland (18/US‐C2C/3447, 13/RC/2073)
This publication has 275 references indexed in Scilit:
- Development of Implantable Medical Devices: From an Engineering PerspectiveInternational Neurourology Journal, 2013
- The Risk of Hardware Infection in Deep Brain Stimulation Surgery Is Greater at Impulse Generator Replacement than at the Primary ProcedureStereotactic and Functional Neurosurgery, 2012
- Design and characterization of miniature piezoelectric generators with low resonant frequencySensors and Actuators A: Physical, 2012
- Preliminary study on development of PVDF nanofiber based energy harvesting device for an artery microrobotMicroelectronic Engineering, 2011
- Second harmonic generating (SHG) nanoprobes for in vivo imagingProceedings of the National Academy of Sciences, 2010
- Barium Titanate Nanoparticles: Highly Cytocompatible Dispersions in Glycol-chitosan and Doxorubicin Complexes for Cancer TherapyNanoscale Research Letters, 2010
- A Glucose BioFuel Cell Implanted in RatsPLOS ONE, 2010
- ZnO – nanostructures, defects, and devicesMaterials Today, 2007
- Energy Harvesting Using a Piezoelectric “Cymbal” Transducer in Dynamic EnvironmentJapanese Journal of Applied Physics, 2004
- Growth and properties of PMN–PT single crystalsPhysica C: Superconductivity and its Applications, 2001