A Multi Camera and Multi Laser Calibration Method for 3D Reconstruction of Revolution Parts
Open Access
- 24 January 2021
- Vol. 21 (3), 765
- https://doi.org/10.3390/s21030765
Abstract
This paper describes a method for calibrating multi camera and multi laser 3D triangulation systems, particularly for those using Scheimpflug adapters. Under this configuration, the focus plane of the camera is located at the laser plane, making it difficult to use traditional calibration methods, such as chessboard pattern-based strategies. Our method uses a conical calibration object whose intersections with the laser planes generate stepped line patterns that can be used to calculate the camera-laser homographies. The calibration object has been designed to calibrate scanners for revolving surfaces, but it can be easily extended to linear setups. The experiments carried out show that the proposed system has a precision of 0.1 mm.Keywords
This publication has 20 references indexed in Scilit:
- A Calibration Method for a Laser Triangulation Scanner Mounted on a Robot Arm for Surface MappingSensors, 2019
- In-Line Dimensional Inspection of Warm-Die Forged Revolution Workpieces Using 3D Mesh ReconstructionApplied Sciences, 2019
- A Comprehensive and Versatile Camera Model for Cameras with Tilt LensesInternational Journal of Computer Vision, 2016
- Comparison and error analysis of the standard pin-hole and Scheimpflug camera calibration modelsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2013
- Real-Time 3D Model Reconstruction with a Dual-Laser Triangulation System for Assembly Line Completeness InspectionPublished by Springer Science and Business Media LLC ,2013
- Calibration of a dual-laser triangulation system for assembly line completeness inspectionPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2012
- A new method for Scheimpflug camera calibrationPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2011
- Calibration procedure for 3D measurement systems using two cameras and a laser lineOptics & Laser Technology, 2009
- 3D High Precision Tube Bevel Measurement using laser based Rotating ScannerPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2006
- Calibrating a Structured Light Stripe System: A Novel ApproachInternational Journal of Computer Vision, 1999