Floating magnetic microrobots for fiber functionalization
- 11 September 2019
- journal article
- research article
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 4 (34)
- https://doi.org/10.1126/scirobotics.aax8336
Abstract
Because minimally invasive surgery is increasingly used to target small lesions, demand is growing for miniaturized tools—such as microcatheters, articulated microforceps, or tweezers—that incorporate sensing and actuation for precision surgery. Although existing microfabrication techniques have addressed the construction of these devices, accurate integration and functionalization of chemical and physical sensors represent major challenges. This paper presents a microrobotic platform for the functionalization of fibers of diameters from 140 to 830 micrometers, with a patterning precision of 5 micrometers and an orientation error below 0.4°. To achieve this, we developed two 2 millimeter–by–3 millimeter, 200-micrometer-thick microrobots to align floating electronic circuits on a fiber during a wet transfer process. The position and orientation of the microrobots were controlled at the air/water interface by a permanent magnet. The stiffness of the position controlled was 0.2 newton millimeter, leading to an average force of 0.5 newton. The nonhomogeneous magnetic field of the magnet, associated with different preferred magnetization directions recorded in the microrobots, allowed the distance between the two microrobots to be precisely controlled. This extra degree of freedom was used to control the microrobot pair as a tweezer to grab and release floating electronic patterns, whereas the others were used to align the pattern position and orientation with the fiber. A model of this control, as well as the microrobots’ interaction through surface tension, is proposed. Detailed performance validation is provided, and various exemplar sensor embodiments on a 200-micrometer-diameter fiber and three-dimensional devices are demonstrated.Keywords
Funding Information
- EPSRC (EP/P012779/1)
This publication has 41 references indexed in Scilit:
- Transfer of CVD-Grown Monolayer Graphene onto Arbitrary SubstratesACS Nano, 2011
- Optimizing Label-Free DNA Electrical Detection on Graphene PlatformAnalytical Chemistry, 2011
- Roll-to-roll production of 30-inch graphene films for transparent electrodesNature Nanotechnology, 2010
- Wedging Transfer of NanostructuresNano Letters, 2010
- Transfer of Large-Area Graphene Films for High-Performance Transparent Conductive ElectrodesNano Letters, 2009
- Quantitative Modeling and Optimization of Magnetic TweezersBiophysical Journal, 2009
- Large Area, Few-Layer Graphene Films on Arbitrary Substrates by Chemical Vapor DepositionNano Letters, 2008
- The “Cheerios effect”American Journal of Physics, 2005
- Long-range attraction between colloidal spheres at the air-water interface: The consequence of an irregular meniscusPhysical Review E, 2000
- Equilibrium and mutual attraction or repulsion of objects supported by surface tensionPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1997