Estimation of Tree Height by Combining Low Density Airborne LiDAR Data and Images Using the 3D Tree Model: A Case Study in a Subtropical Forest in China
Open Access
- 25 November 2020
- Vol. 11 (12), 1252
- https://doi.org/10.3390/f11121252
Abstract
In general, low density airborne LiDAR (Light Detection and Ranging) data are typically used to obtain the average height of forest trees. If the data could be used to obtain the tree height at the single tree level, it would greatly extend the usage of the data. Since the tree top position is often missed by the low density LiDAR pulse point, the estimated forest tree height at the single tree level is generally lower than the actual tree height when low density LiDAR data are used for the estimation. To resolve this problem, in this paper, a modified approach based on three-dimensional (3D) parameter tree model was adopted to reconstruct the tree height at the single tree level by combining the characteristics of high resolution remote sensing images and low density airborne LiDAR data. The approach was applied to two coniferous forest plots in the subtropical forest region, Fujian Province, China. The following conclusions were reached after analyzing the results: The marker-controlled watershed segmentation method is able to effectively extract the crown profile from sub meter-level resolution images without the aid of the height information of LiDAR data. The adaptive local maximum method satisfies the need for detecting the vertex of a single tree crown. The improved following-valley approach is available for estimating the tree crown diameter. The 3D parameter tree model, which can take advantage of low-density airborne LiDAR data and high resolution images, is feasible for improving the estimation accuracy of the tree height. Compared to the tree height results from only using the low density LiDAR data, this approach can achieve higher estimation accuracy. The accuracy of the tree height estimation at the single tree level for two test areas was more than 80%, and the average estimation error of the tree height was 0.7 m. The modified approach based on the three-dimensional parameter tree model can effectively increase the estimation accuracy of individual tree height by combining the characteristics of high resolution remote sensing images and low density airborne LiDAR data.This publication has 38 references indexed in Scilit:
- Modeling Stand Height, Volume, and Biomass from Very High Spatial Resolution Satellite Imagery and Samples of Airborne LiDARRemote Sensing, 2013
- A meta-analysis of terrestrial aboveground biomass estimation using lidar remote sensingRemote Sensing of Environment, 2012
- Advances in Forest Inventory Using Airborne Laser ScanningRemote Sensing, 2012
- Individual tree detection based on variable and fixed window size local maxima filtering applied to IKONOS imagery for even-agedEucalyptusplantation forestsInternational Journal of Remote Sensing, 2011
- Isolating Individual Trees in a Savanna Woodland Using Small Footprint Lidar DataPhotogrammetric Engineering & Remote Sensing, 2006
- Use of airborne LiDAR and aerial photography in the estimation of individual tree heights in forestryComputers & Geosciences, 2005
- Mapping individual tree location, height and species in broadleaved deciduous forest using airborne LIDAR and multi‐spectral remotely sensed dataInternational Journal of Remote Sensing, 2005
- LIDAR-based geometric reconstruction of boreal type forest stands at single tree level for forest and wildland fire managementRemote Sensing of Environment, 2004
- Individual Tree-Crown Delineation and Treetop Detection in High-Spatial-Resolution Aerial ImageryPhotogrammetric Engineering & Remote Sensing, 2004
- Local Maximum Filtering for the Extraction of Tree Locations and Basal Area from High Spatial Resolution ImageryRemote Sensing of Environment, 2000