Flow Control of Radial Inlet Chamber and Downstream Effects on a Centrifugal Compressor Stage
Open Access
- 1 March 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (5), 2168
- https://doi.org/10.3390/app11052168
Abstract
Radial inlet chambers are widely used in various multistage centrifugal compressors, although they induce extra flow loss and inlet distortions. In this paper, the detailed flow characteristics inside the radial inlet chamber of an industrial centrifugal compressor have been numerically investigated for flow control and performance improvement. First, the numerical results are validated against the experimental data, and flow conditions inside the inlet chambers with different structures are compared. They indicate that, in the non-guide vane scheme, sudden expansions, tangential flows and flow separations in the spiral and annular convergent channels are the major causes of flow loss and distortions, while using guide vanes could introduce additional flow impacts, separations and wakes. Based on the flow analysis, structure improvements have been carried out on the radial inlet chamber, and an average increase of 4.97% has been achieved in the inlet chamber efficiencies over different operating conditions. However, the results further reveal that the increases in the performance and overall flow uniformity just in the radial inlet chamber do not necessarily mean a performance improvement in the downstream components, and the distribution of the positive tangential velocity at the impeller inlet might be a more essential factor for the efficiency of the whole compressor.Funding Information
- National Natural Science Foundation of China (52006022)
- China Postdoctoral Science Foundation (2020M670726 and 2020M680928)
- National Key Research and Development Program of China (2018YFC0309003)
- 111 Project (B18009)
- Natural Science Foundation of Liaoning Province (2020-BS-067)
- Fundamental Research Funds for the Central Universities (3132019368)
This publication has 30 references indexed in Scilit:
- Design, Plant Test and CFD Calculation of a Turbocharger for a Low-Speed EngineApplied Sciences, 2020
- Aerodynamic Optimization Design of a 150 kW High Performance Supercritical Carbon Dioxide Centrifugal Compressor without a High Speed RequirementApplied Sciences, 2020
- Effect of Vaneless Diffuser Shape on Performance of Centrifugal CompressorApplied Sciences, 2020
- Design of a Centrifugal Compressor with Low Solidity Vaned Diffuser (LSVD) for Large-Scale Compressed Air Energy Storage (CAES)Journal of Thermal Science, 2019
- Direction for High-Performance Supercritical CO2 Centrifugal Compressor Design for Dry Cooled Supercritical CO2 Brayton CycleApplied Sciences, 2019
- Optimization of a Centrifugal Compressor Using the Design of Experiment TechniqueApplied Sciences, 2019
- A review of prewhirl regulation by inlet guide vanes for compressor and pumpProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2018
- Effect of the inlet geometry on performance, surge margin and noise emission of an automotive turbocharger compressorApplied Thermal Engineering, 2017
- Potential of flow pre-whirl at the compressor inlet of automotive engine turbochargers to enlarge surge margin and overcome packaging limitationsInternational Journal of Heat and Fluid Flow, 2007
- Surge limit definition in a specific test bench for the characterization of automotive turbochargersExperimental Thermal and Fluid Science, 2005