Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries
Top Cited Papers
- 24 August 2020
- journal article
- research article
- Published by Springer Science and Business Media LLC in Nature Materials
- Vol. 20 (1), 84-92
- https://doi.org/10.1038/s41563-020-0767-8
Abstract
Ni-rich layered cathode materials are among the most promising candidates for high-energy-density Li-ion batteries, yet their degradation mechanisms are still poorly understood. We report a structure-driven degradation mechanism for NMC811 (LiNi0.8Mn0.1Co0.1O2), in which a proportion of the material exhibits a lowered accessible state of charge at the end of charging after repetitive cycling and becomes fatigued. Operando synchrotron long-duration X-ray diffraction enabled by a laser-thinned coin cell shows the emergence and growth in the concentration of this fatigued phase with cycle number. This degradation is structure driven and is not solely due to kinetic limitations or intergranular cracking: no bulk phase transformations, no increase in Li/Ni antisite mixing and no notable changes in the local structure or Li-ion mobility of the bulk are seen in aged NMCs. Instead, we propose that this degradation stems from the high interfacial lattice strain between the reconstructed surface and the bulk layered structure that develops when the latter is at states of charge above a distinct threshold of approximately 75%. This mechanism is expected to be universal in Ni-rich layered cathodes. Our findings provide fundamental insights into strategies to help mitigate this degradation process.Funding Information
- Faraday Institution, grant number FIRG001
This publication has 42 references indexed in Scilit:
- Fatigue of LiNi0.8Co0.15Al0.05O2 in commercial Li ion batteriesJournal of Power Sources, 2015
- Profiling the nanoscale gradient in stoichiometric layered cathode particles for lithium-ion batteriesEnergy & Environmental Science, 2014
- Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteriesNature Communications, 2014
- Investigation of Changes in the Surface Structure of LixNi0.8Co0.15Al0.05O2 Cathode Materials Induced by the Initial ChargeChemistry of Materials, 2014
- Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteriesJournal of Power Sources, 2013
- NiO[sub 2] Obtained by Electrochemical Lithium Deintercalation from Lithium Nickelate: Structural ModificationsJournal of the Electrochemical Society, 2000
- Temperature Dependence of 207 Pb MAS Spectra of Solid Lead Nitrate. An Accurate, Sensitive Thermometer for Variable-Temperature MASJournal of Magnetic Resonance, Series A, 1995
- In situ x-ray diffraction and electrochemical studies of Li1−xNiO2Solid State Ionics, 1993
- Structural classification and properties of the layered oxidesPhysica B+C, 1980
- X-ray determination of electron-density distributions in oxides, MgO, MnO, CoO, and NiO, and atomic scattering factors of their constituent atoms.Proceedings of the Japan Academy, Series B, 1979