Prediction of Gap Asymmetry in Differential Micro Accelerometers
Open Access
- 25 May 2012
- Vol. 12 (6), 6857-6868
- https://doi.org/10.3390/s120606857
Abstract
Gap asymmetry in differential capacitors is the primary source of the zero bias output of force-balanced micro accelerometers. It is also used to evaluate the applicability of differential structures in MEMS manufacturing. Therefore, determining the asymmetry level has considerable significance for the design of MEMS devices. This paper proposes an experimental-theoretical method for predicting gap asymmetry in differential sensing capacitors of micro accelerometers. The method involves three processes: first, bi-directional measurement, which can sharply reduce the influence of the feedback circuit on bias output, is proposed. Experiments are then carried out on a centrifuge to obtain the input and output data of an accelerometer. Second, the analytical input-output relationship of the accelerometer with gap asymmetry and circuit error is theoretically derived. Finally, the prediction methodology combines the measurement results and analytical derivation to identify the asymmetric error of 30 accelerometers fabricated by DRIE. Results indicate that the level of asymmetry induced by fabrication uncertainty is about ±5 × 10−2, and that the absolute error is about ±0.2 µm under a 4 µm gap.Keywords
This publication has 15 references indexed in Scilit:
- A probabilistic design optimization for MEMS tunable capacitorsMicroelectronics Journal, 2008
- Application of optimal and robust design methods to a MEMS accelerometerSensors and Actuators A: Physical, 2008
- Electrical method to measure the dynamic behaviour and the quadrature error of a MEMS gyroscope sensorSensors and Actuators A: Physical, 2007
- Robust Design and Model Validation of Nonlinear Compliant MicromechanismsJournal of Microelectromechanical Systems, 2006
- Predictions of strength in MEMS components with defects––a novel experimental–theoretical approachInternational Journal of Solids and Structures, 2005
- A New Approach of Lateral RF MEMS SwitchAnalog Integrated Circuits and Signal Processing, 2004
- Fabrication, characterization, and analysis of a DRIE CMOS-MEMS gyroscopeIEEE Sensors Journal, 2003
- A DRIE CMOS-MEMS gyroscopePublished by Institute of Electrical and Electronics Engineers (IEEE) ,2003
- Surface micromachined force gauges: uncertainty and reliabilityJournal of Micromechanics and Microengineering, 2001
- Robust optimal design of a vibratory microgyroscope considering fabrication errorsJournal of Micromechanics and Microengineering, 2001