Sewage Sludge Valorization in Fired Clay Bricks: Physical Properties and Radiological Assessment
- 1 January 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Hazardous, Toxic, and Radioactive Waste
- Vol. 25 (1), 04020003
- https://doi.org/10.1061/(asce)hz.2153-5515.0000558
Abstract
Sewage sludge resulting from wastewater treatment process by infiltration/percolation using a matrix of adsorbent (coal ash waste/sand) was found to contain harmful elements. As an alternative approach for a sustainable valorization of this sludge, the present study intends to study the possibility of partially substituting clay in fired clay brick for sludge. Different bricks were manufactured incorporating a varied rate of sludge (5%, 10%, 15%, 20%, and 25%, by dry weight), as well as a reference brick that includes only the conventionnel raw materials. To evaluate their suitability as engineering building materials, the bricks specimens have been submitted to a set of trial experiments; linear drying shrinkage; absorption by capillarity, bulk density, mechanical resistance strength; and radiological proprieties. Bulk density and compressive strength were found to be inversely proportional to the amount of sewage sludge, and the results are respectively ranged from 1,882.81 to 1,921.87 kg/m3, and from 5.78 to 16.1 MPa. Specimens meet the Moroccan norm that requires a minimum of 5 MPa in compressive strength resistance for brick type class RC 50. Sludge/clay bricks favor the reduction of linear shrinkage, and specimens including up to 25% of waste sludge are improved on an order of 38.04% compared to the reference. The radiological assessment of sludge bricks ensures their safety since they are far below the required limits (less than 10 mSv · y−1). According to results, incorporating up to 25% of sludge in bricks is suitable for building purposes.Keywords
This publication has 24 references indexed in Scilit:
- Utilization of sewage sludge, oven slag and fly ash in clay brick productionConstruction and Building Materials, 2018
- Impact of water and solution of glycerol on the treatment of sediment by cementInternational Journal of Pavement Engineering, 2018
- State-of-the-art applications of fly ash from coal and biomass: A focus on zeolite synthesis processes and issuesProgress in Energy and Combustion Science, 2018
- Development of porous lightweight clay bricks using a replication methodJournal of the Australian Ceramic Society, 2017
- Use of bottom ash from olive pomace combustion in the production of eco-friendly fired clay bricksWaste Management, 2016
- Measurement of Natural Radioactivity and Radon Exhalation Rate in Coal Ash Samples from a Thermal Power PlantWorld Journal of Nuclear Science and Technology, 2016
- Utilization of water treatment plant sludge in structural ceramics bricksApplied Clay Science, 2015
- Recycling of sugarcane bagasse ash waste in the production of clay bricksJournal of Environmental Management, 2012
- Effect of organic residues addition on the technological properties of clay bricksWaste Management, 2008
- Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materialsCement and Concrete Research, 2007