Design and Analysis of Exhaust Manifold
Open Access
- 13 November 2020
- journal article
- Published by Asian Research Association in International Research Journal of Multidisciplinary Technovation
- Vol. 2 (6), 1-8
- https://doi.org/10.34256/irjmt2061
Abstract
The exhaust manifold system is mountedon the cylinder head of theengine. It is associated with the catalyst converter at the other end. The emitted gases transmitted from the chamber come out at temperatures of about 800 °C and with pressures extending from 100 to 500 kPa. The exhaust manifold system is exposed to high temperatures and weights which will lead to thermo mechanical failure. Redesigning an exhaust manifold by determining Thermal stresses and deflections exhibited under various operating conditions with different materials and temperatures. The objective is to ensure the suitability of the design for a particular material from the view point of reliability and serviceability. Defects in existing manifold are cracks usually occur due to prolonged exposure to extreme temperatures, defects in casting and Heat cycling. High end cad cam software such as Unigraphics and Ansys is used for modeling and analysis. The 3d Model of exhaust manifold is subjected to thermal and structural loads and results are tabulated according to the procedure for the Exhaust manifold.Keywords
This publication has 6 references indexed in Scilit:
- Modeling and Analysis of Exhaust Manifold using CFDIOP Conference Series: Materials Science and Engineering, 2018
- Design and Analysis of Exhaust Manifold Comparing Different SpecificationsInternational Journal of Engineering Trends and Technology, 2018
- CFD Analysis of Exhaust Manifold of SI Engine and Comparison of Back Pressure using Alternative FuelsIOSR Journal of Mechanical and Civil Engineering, 2017
- Analysis of Exhaust Manifold using Computational Fluid DynamicsFluid Mechanics: Open Access, 2016
- Exhaust Manifold Design – FEA ApproachInternational Journal of Engineering Trends and Technology, 2014
- The Impact of Temperature Effect on Exhaust Manifold Thermal Modal AnalysisResearch Journal of Applied Sciences, Engineering and Technolog, 2013