Perspectives on Environmental Barrier Coatings (EBCs) Manufactured via Air Plasma Spray (APS) on Ceramic Matrix Composites (CMCs): A Tutorial Paper
- 1 January 2021
- journal article
- research article
- Published by Springer Science and Business Media LLC in Journal of Thermal Spray Technology
- Vol. 30 (1-2), 40-58
- https://doi.org/10.1007/s11666-021-01168-0
Abstract
No abstract availableKeywords
This publication has 57 references indexed in Scilit:
- Lu2O3-SiO2-ZrO2 Coatings for Environmental Barrier Application by Solution Precursor Plasma Spraying and Influence of Precursor ChemistryJournal of Thermal Spray Technology, 2013
- Thermal-barrier coatings for more efficient gas-turbine enginesMRS Bulletin, 2012
- Effects of substrate curvature radius, deposition temperature and coating thickness on the residual stress field of cylindrical thermal barrier coatingsSurface and Coatings Technology, 2011
- A novel test approach for plasma-sprayed coatings tested simultaneously under CMAS and thermal gradient cycling conditionsSurface and Coatings Technology, 2010
- Calcium–Magnesium Alumino‐Silicate Interaction with Yttrium Monosilicate Environmental Barrier CoatingsJournal of the American Ceramic Society, 2010
- Front MatterPublished by Informa UK Limited ,2010
- Tailoring protective coatings for all-oxide ceramic matrix composites in high temperature-/high heat flux environments and corrosive mediaMaterialwissenschaft und Werkstofftechnik, 2007
- Thermal and Environmental Barrier Coatings for SiC/SiC CMCs in Aircraft Engine Applications*International Journal of Applied Ceramic Technology, 2004
- SiC Recession Caused by SiO2 Scale Volatility under Combustion Conditions: II, Thermodynamics and Gaseous‐Diffusion ModelJournal of the American Ceramic Society, 1999
- Development of an Aeroderivative Gas Turbine Dry Low Emissions Combustion SystemJournal of Engineering for Gas Turbines and Power, 1994