Design and Analysis of Thermal Management System of Power Matching Transmission in Energy Machinery
- 30 April 2021
- journal article
- research article
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 39 (2), 629-637
- https://doi.org/10.18280/ijht.390234
Abstract
With the technical development of energy conservation and emission reduction technology, the internal structure of engineering machinery has become denser. The rising full-machine heat load that ensues challenges the effect of the cooling system. In the traditional thermal management system for the transmission in energy machinery, the cooling capacity does not fully match the load of each subsystem, and the thermal management components cannot adapt to the dynamic cooling demand of engineering machinery. To solve these problems, this paper designs and analyzes the thermal management system of power matching transmission in energy machinery. Firstly, the energy distribution among different components of engineering machinery, including, hydraulic system, transmission system, and cooling system, was described in each work section, and the dynamic matching method was detailed for hydraulic torque converter. Then, heat source engine, hydraulic torque converter, and hydraulic retarder were selected as the targets of thermal management for the power transmission system of loader. Next, the thermal management cycle was framed as a scheme in which the engine transmission system is independent with the cooling circulation system, and a heat transfer calculation model was constructed for loader transmission system. The proposed model was proved effective through experiments. The research results provide a reference for the thermal management of other subsystems of engineering machinery.Keywords
Funding Information
- Guangxi Higher Education Undergraduate Teaching Reform Project in 2019 (2019JGZ143)
This publication has 20 references indexed in Scilit:
- Numerical Calculation Method of Model Predictive Control for Integrated Vehicle Thermal Management Based on Underhood Coupling Thermal TransmissionEnergies, 2019
- Power Peak Shaving With Data Transmission Delays for Thermal Management in Smart BuildingsIEEE Transactions on Industrial Informatics, 2017
- Super-compatible functional boron nitride nanosheets/polymer films with excellent mechanical properties and ultra-high thermal conductivity for thermal managementJournal of Materials Chemistry C, 2017
- Incentive-Based Mechanism for Truthful Occupant Comfort Feedback in Human-in-the-Loop Building Thermal ManagementIEEE Systems Journal, 2017
- Thermo-mechanical properties of carbon nanotubes and applications in thermal managementAdvances in Natural Sciences: Nanoscience and Nanotechnology, 2016
- Thermal management and mechanical structures for silicon detector systemsJournal of Instrumentation, 2015
- Efficiency Optimization Using a Power-Guided Engine Control for Management of Thermal-and Mechanical Demands Using the Example of a Micro Combined Heat and Power UnitSAE International Journal of Engines, 2014
- Study on the improvement in continuously variable transmission efficiency with a thermal management systemApplied Thermal Engineering, 2013
- Mechanical and Thermal Management Characteristics of Ultrahigh Surface Area Single‐Walled Carbon Nanotube AerogelsAdvanced Functional Materials, 2012
- Non‐convex economic thermal power management with transmission loss and environmental factorsInternational Journal of Energy Sector Management, 2012