High sensitivity ultrasonic NDT technique for detecting creep damage at the early stage in power plant steels
- 19 January 2022
- journal article
- research article
- Published by Elsevier BV in International Journal of Pressure Vessels and Piping
- Vol. 196, 104613
- https://doi.org/10.1016/j.ijpvp.2022.104613
Abstract
No abstract availableKeywords
This publication has 36 references indexed in Scilit:
- Sensitivity analysis of a directional potential drop sensor for creep monitoringNDT & E International, 2011
- A review of non-destructive techniques for the detection of creep damage in power plant steelsNDT & E International, 2010
- A Review of Methods to Estimate Creep Damage in Low‐Alloy Steel Power Station Steam PipesStrain, 2009
- New samples with artificial voids for ultrasonic investigation of material damage due to creepNDT & E International, 2009
- Characterization of creep–fatigue in ferritic 9Cr–1Mo–V–Nb steel using ultrasonic velocityJournal of Nuclear Materials, 2008
- Acoustic damping characterization and microstructure evolution in nickel-based superalloy during creepInternational Journal of Solids and Structures, 2005
- A study on detection of creep damage before crack initiation in austenitic stainless steelMaterials Science and Engineering: A, 2004
- Type IV creep cavity accumulation and failure in steel weldsInternational Journal of Pressure Vessels and Piping, 2003
- Long-term creep behavior of 9–12%Cr power plant steelsMaterials Characterization, 2003
- Five-power-law creep in single phase metals and alloysProgress in Materials Science, 2000