A Comparative Study on Constant Current GTAW and Constant Current GTAW with Superimposed HF Current of SDSS Grade SAF2507
- 15 April 2021
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 903, 1-10
- https://doi.org/10.4028/www.scientific.net/amm.903.1
Abstract
This present investigation explore the microstructural properties of SDSS grade SAF2507 weldments produced by constant current GTAW and constant current GTAW with superimposed high frequency (HF) current. The macro, microstructural examination and mechanical characterization were performed. From the results, it was found that, the superimposition of high-frequency current on the welding current results in constriction of the arc during constant current GTAW with superimposed HF current. The superimposed HF current restricts the arc with for all intents and purposes a similar root and extended diameter. The weldment region unit considered the standard for mechanical and microstructural properties. The dominance of properties because of the association of inter pulse or HF current is described along with its related science concerned.Keywords
This publication has 14 references indexed in Scilit:
- The Current State of Application of Ultra- and Nanostructured Powders in Technologies in Welding Technologies (Review)Materials Science Forum, 2018
- GTA pulsed current welding of thin sheets of SS304 producing superior quality of joint at high welding speedJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2017
- Characteristics of Extra Narrow Gap Weld of HSLA Steel Welded by Single-Seam per Layer Pulse Current GMA Weld DepositionJournal of Materials Engineering and Performance, 2017
- Critical aspects of pulse current GMA welding of stainless steel influencing metallurgical characteristicsInternational Journal of Microstructure and Materials Properties, 2017
- Studies on the structure–property relationships and corrosion behaviour of the activated flux TIG welding of UNS S32750Journal of Manufacturing Processes, 2016
- Influence of PC-GTAW Parameters on the Microstructural and Mechanical Properties of Thin AISI 1008 Steel JointsJournal of Materials Engineering and Performance, 2016
- Hydrogen influence on fracture toughness of the weld metal in super duplex stainless steel (UNS S32750) welded with two different heat inputInternational Journal of Hydrogen Energy, 2015
- Influence of thermal characteristics on microstructure of pulse current GMA weld bead of HSLA steelThe International Journal of Advanced Manufacturing Technology, 2014
- Mechanical Properties of AISI 316L Austenitic Stainless Steels Welded by GTAWAdvanced Materials Research, 2013
- Effect of Aging on the Toughness of Austenitic and Duplex Stainless Steel WeldmentsJournal of Materials Science & Technology, 2010