Laser-induced Forward Transfer Hydrogel Printing: A Defined Route for Highly Controlled Process
Open Access
- 22 April 2020
- journal article
- research article
- Published by AccScience Publishing in International Journal of Bioprinting
- Vol. 6 (3)
- https://doi.org/10.18063/ijb.v6i3.271
Abstract
Laser-induced forward transfer is a versatile, non-contact, and nozzle-free printing technique which has demonstrated high potential for different printing applications with high resolution. In this article, three most widely used hydrogels in bioprinting (2% hyaluronic acid sodium salt, 1% methylcellulose, and 1% sodium alginate) were used to study laser printing processes. For this purpose, the authors applied a laser system based on a pulsed infrared laser (1064 nm wavelength, 8 ns pulse duration, 1 – 5 J/cm2 laser fluence, and 30 μm laser spot size). A high-speed shooting showed that the increase in fluence caused a sequential change in the transfer regimes: No transfer regime, optimal jetting regime with a single droplet transfer, high speed regime, turbulent regime, and plume regime. It was demonstrated that in the optimal jetting regime, which led to printing with single droplets, the size and volume of droplets transferred to the acceptor slide increased almost linearly with the increase of laser fluence. It was also shown that the maintenance of a stable temperature (±2°C) allowed for neglecting the temperature-induced viscosity change of hydrogels. It was determined that under room conditions (20°C, humidity 50%), the hydrogel layer, due to drying processes, decreased with a speed of about 8 μm/min, which could lead to a temporal variation of the transfer process parameters. The authors developed a practical algorithm that allowed quick configuration of the laser printing process on an applied experimental setup. The configuration is provided by the change of the easily tunable parameters: Laser pulse energy, laser spot size, the distance between the donor ribbon and acceptor plate, as well as the thickness of the hydrogel layer on the donor ribbon slide.Keywords
This publication has 59 references indexed in Scilit:
- Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in MicePLOS ONE, 2013
- Impulsively actuated jets from thin liquid films for high-resolution printing applicationsJournal of Fluid Mechanics, 2012
- Layer-by-Layer Tissue Microfabrication Supports Cell ProliferationIn VitroandIn VivoTissue Engineering, Part C: Methods, 2012
- Laser Printing of Three-Dimensional Multicellular Arrays for Studies of Cell–Cell and Cell–Environment InteractionsTissue Engineering, Part C: Methods, 2011
- Laser-assisted bioprinting for creating on-demand patterns of human osteoprogenitor cells and nano-hydroxyapatiteBiofabrication, 2011
- Adipogenic differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cellsBiofabrication, 2011
- Osteoblastic differentiation and stress response of human mesenchymal stem cells exposed to alternating current electric fieldsBioMedical Engineering OnLine, 2011
- Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprintingBioMedical Engineering OnLine, 2011
- Laser Printing of Skin Cells and Human Stem CellsTissue Engineering, Part C: Methods, 2010
- Optical properties of human skin, subcutaneous and mucous tissues in the wavelength range from 400 to 2000 nmJournal of Physics D: Applied Physics, 2005