Facile synthesis, characterization and application of heterogeneous Al@Si materials for adsorptive mitigation of fluoride: Optimization and cost analysis
- 8 June 2021
- journal article
- Published by Elsevier BV in Environmental Nanotechnology, Monitoring & Management
- Vol. 16, 100490
- https://doi.org/10.1016/j.enmm.2021.100490
Abstract
No abstract availableKeywords
This publication has 23 references indexed in Scilit:
- Effective adsorption of phenols using nitrogen-containing porous activated carbon prepared from sunflower platesKorean Journal of Chemical Engineering, 2015
- Adsorption thermodynamics and kinetics of ranitidine hydrochloride onto superheated steam activated carbon derived from mung bean huskJournal of Environmental Chemical Engineering, 2015
- Removal of fluoride from drinking water using tea waste loaded with Al/Fe oxides: A novel, safe and efficient biosorbentApplied Surface Science, 2015
- Impact of laterite characteristics on fluoride removal from waterJournal of Chemical Technology & Biotechnology, 2015
- Comparison of aluminum modified natural materials in the removal of fluoride ionsJournal of Colloid and Interface Science, 2014
- Adsorptive removal of phenol from coke-oven wastewater using Gondwana shale, India: experiment, modeling and optimizationDesalination and Water Treatment, 2013
- Removal of fluoride from aqueous solution and groundwater by wheat straw, sawdust and activated bagasse carbon of sugarcaneEcological Engineering, 2013
- The Langmuir monolayer adsorption model of organic matter into effective pores in activated carbonJournal of Colloid and Interface Science, 2013
- Application of Response Surface Methodology for preparation of low-cost adsorbent from citrus fruit peel and for removal of Methylene BlueDesalination, 2011
- THE ADSORPTION OF GASES ON PLANE SURFACES OF GLASS, MICA AND PLATINUM.Journal of the American Chemical Society, 1918