Corrosion and Kinetic Study of Eucalyptus camaldulensis Seeds Extract Percolated with Methanol on Aluminium Coupons in HCl
- 7 January 2020
- journal article
- Published by Earthline Publishers in Earthline Journal of Chemical Sciences
Abstract
This research discusses a detail optimization of Eucalyptus camaldulensis seeds extract as corrosion inhibitor for aluminum coupons in HCl using weight loss measurement and kinetic study. The result shows that the maximum inhibitor efficiency was obtained at a concentration of 2.0 (%W/V). However the highest inhibitor efficiency of 85% was obtained at 50ºC and the least inhibitor efficiency of 29% was obtained at 30ºC. Thermodynamic consideration revealed that adsorption of inhibitor of aluminum surface was exothermic and consistent with chemical adsorption mechanism.Keywords
This publication has 17 references indexed in Scilit:
- The effects of Aloe vera extract on corrosion and kinetics of corrosion process of zinc in HCl solutionCorrosion Science, 2010
- The role of acid anion on the inhibition of the acidic corrosion of steel by lupine extractCorrosion Science, 2009
- Inhibitive and Adsorption Properties of Ethanol Extract of Seeds and Leaves of Azadirachta Indica on the Corrosion of Mild Steel in H2SO4Portugaliae Electrochimica Acta, 2009
- Inhibitory action of Phyllanthus amarus extracts on the corrosion of mild steel in acidic mediaCorrosion Science, 2008
- Corrosion inhibition of iron in acidic solutions by alkyl quaternary ammonium halides: Correlation between inhibition efficiency and molecular structureApplied Surface Science, 2005
- Electrochemical and analytical study of corrosion inhibition on carbon steel in HCl medium by 1,12-bis(1,2,4-triazolyl)dodecaneCorrosion Science, 2005
- Corrosion inhibition of some metals using lawsonia extractCorrosion Science, 2005
- Degradation of aluminum metal matrix composites in salt water and its controlMaterials & Design (1980-2015), 2002
- A Comparative Study of Corrosion Behavior of Al/SiCp Composite with Cast IronCorrosion, 2001
- Corrosion and Testing of Engine CoolantsPublished by ASTM International ,1999