Study on kinematic characteristics of planetary multistage face gears transmission
- 13 June 2019
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 234 (2-3), 572-585
- https://doi.org/10.1177/0954407019855908
Abstract
A planetary gear transmission system with multistage face gears combinations as core component can easily realize the variable speed in differential transmission ratios with structural advantages. In order to improve the transmission stability and loading capacity, it is necessary to set up a reasonable kinematic model for multistage face gears pair. This study focuses on the kinematic characteristics of multistage face gears structure with double crown surface by the methods of numerical calculation and experimental verification. The transmission error and efficiency solving models are established by numerical calculation method to analyze the influences of each factor in detail. Then the correctness of the above numerical models are verified with transmission error and efficiency experiment. In addition, the numerical results are compared with the experimental results to further indicate the important influences of the multistage face gears components on the transmission error and efficiency of whole transmission system. The results can provide references for the dynamic and experimental study of multistage face gears in some degree.Keywords
Funding Information
- National Natural Science Foundation of China (51575191)
This publication has 28 references indexed in Scilit:
- Thermal and efficiency characterization of a low-backlash planetary gearbox: An integrated numerical-analytical prediction model and its experimental validationProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2015
- Power loss prediction: Application to a 2.5 MW wind turbine gearboxProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2015
- Windage Power Losses of Ordinary Gears: Different CFD Approaches Aimed to the Reduction of the Computational EffortLubricants, 2014
- Churning power losses of ordinary gears: a new approach based on the internal fluid dynamics simulationsLubrication Science, 2014
- Friction torque of cylindrical roller thrust bearings lubricated with wind turbine gear oilsTribology International, 2013
- Friction torque of thrust ball bearings lubricated with wind turbine gear oilsTribology International, 2013
- Load Tooth Contact Analysis for Double-Crowned Face GearApplied Mechanics and Materials, 2012
- DESIGN OF ASYMMETRIC GEAR AND ACCURATE BENDING STRESS ANALYSIS USING THE ES-PIM WITH TRIANGULAR MESHInternational Journal of Computational Methods, 2011
- Study on Transmission Error of Straight Bevel GearsJSME International Journal Series C, 2004
- Design, generation, and stress analysis of two versions of geometry of face-gear drivesMechanism and Machine Theory, 2002