Review—Functionalized Graphene Oxide Membranes as Electrolytes
Open Access
- 1 March 2023
- journal article
- review article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (3), 033503
- https://doi.org/10.1149/1945-7111/acc35e
Abstract
Proton exchange membrane fuel cells (PEMFCs) typically use Nafion®, which has many drawbacks, such as high cost, fuel crossover, and strenuous synthesis processes. As such, an alternative Nafion®-ionomer free proton conductor has drawn significant interest. Graphene oxide membrane (GOM) is a promising alternative due to its hydrophilic nature and attractive proton conductivity under humidified conditions. However, pristine GOMs have drawbacks, including fuel crossover, a high reduction rate of negatively oxygenated functional groups during fuel cell operation, and proton conductivity showing excessive orientation dependence. We focused on nanocomposite-GOM (N-GOM) based on PFSAs, hydrocarbon polymers, synthetic polymers, inorganic-organic polymers, biopolymers, metal-organic frameworks, and micro- and nano-engineered surfaces. GO nanosheets have outstanding dispersion rate and compatibility with ionomer matrices that can be functionalized by sulfonation, polymerization, phosphorylation, cross-linking, incorporated inorganic nanoparticles, and blending with matrix, microscale-nanoscale fabrication. The N-GOM exhibits high-performance fuel cells with improved proton conductivity, physicochemical properties, and low fuel crossover compared to Nafion®. For instance, SCSP/SF membranes with 3% functionalized GO (FGO) content displayed the highest conductivity of 26.90 mS/cm and the best selectivity (methanol) of 4.10 × 105 S/cm3 at room temperature. Moreover, a new scalable, efficient chitosan (CA)-based composite membrane (CA/GO) was fabricated. In addition, surface-patterned nanostructures in thin films increased the PEMFC output power to 950 mW/cm2, higher than 590 mW/cm2 for non-patterned Nafion®. Finally, we report on the optimal composition ratio for each material of the N-GOM-based membrane. This review discusses the most crucial developments in proton conductivity and outlines the current progress for the N-GOM as a revolutionary form of PEM. The general objective of this research is to review all possible modifications of N-GOM from the perspective of their practical application as electrolytes in fuel cellsKeywords
Funding Information
- National Research Foundation of Korea (NRF-2022R1I1A3073275)
This publication has 139 references indexed in Scilit:
- Graphene Oxide Fuel CellJournal of the Electrochemical Society, 2013
- Chitosan biopolymer for fuel cell applicationsCarbohydrate Polymers, 2013
- Crosslinked Hexafluoropropylidene Polybenzimidazole Membranes with Chloromethyl Polysulfone for Fuel Cell ApplicationsAdvanced Energy Materials, 2013
- Nanofluidic Ion Transport through Reconstructed Layered MaterialsJournal of the American Chemical Society, 2012
- Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs)Progress in Polymer Science, 2011
- A poly (ethylene oxide)/graphene oxide electrolyte membrane for low temperature polymer fuel cellsJournal of Power Sources, 2011
- Direct synthesis of sulfonated mesoporous silica as inorganic fillers of proton-conducting organic–inorganic composite membranesJournal of Membrane Science, 2010
- Preparation and characterization of graphene oxide paperNature, 2007
- Water vapor sorption and diffusion properties of sulfonated polyimide membranesJournal of Membrane Science, 2003
- Preparation of Graphitic OxideJournal of the American Chemical Society, 1958