Efficiency Analysis for Triple Band RF Energy Harvesting
Open Access
- 30 June 2021
- journal article
- Published by Aksaray University in Aksaray University Journal of Science and Engineering
- Vol. 5 (1), 36-45
- https://doi.org/10.29002/asujse.911507
Abstract
In this paper, a multi-band RF energy harvesting circuit is designed. The output voltage and power of the system built at 900 MHz, 1800 MHz and 2450 MHz frequencies are revealed. All simulations in this paper are made using the Advance Design System (ADS) 2017 program. The load resistances that give the maximum power for each frequency are determined and the appropriate load is selected for all three frequencies. Then, the multi-stage Dickson Voltage Multiplier (DVM) from two to six stages is designed and the number of stages giving the maximum power for each frequency is determined using the selected load. L type and π type impedance matching have been applied to obtain the maximum output power in DVM design, which includes this number of stages and has two Schottky diode models (HSMS-2852). Finally, these three circuits are combined and the output voltage and efficiency of the resulting system are analyzed.Keywords
This publication has 10 references indexed in Scilit:
- Microwave antennas—An intrinsic part of RF energy harvesting systems: A contingent study about its design methodologies and state‐of‐art technologies in current scenarioInternational Journal of RF and Microwave Computer-Aided Engineering, 2020
- A Sensitive Triple-Band Rectifier for Energy Harvesting ApplicationsIEEE Access, 2020
- A Hybrid Cockcroft–Walton/Dickson Multiplier for High Voltage GenerationIEEE Transactions on Power Electronics, 2019
- Analysis of Dickson Voltage Multiplier for RF Energy HarvestingPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2019
- Multiband Ambient RF Energy Harvesting Circuit Design for Enabling Batteryless Sensors and IoTIEEE Internet of Things Journal, 2018
- A quad-band antenna for multi-band radio frequency energy harvesting circuitAEU - International Journal of Electronics and Communications, 2018
- RF power harvesting: a review on designing methodologies and applicationsMicro and Nano Systems Letters, 2017
- Energy replenishment using renewable and traditional energy resources for sustainable wireless sensor networks: A reviewRenewable and Sustainable Energy Reviews, 2015
- Realization of efficient RF energy harvesting circuits employing different matching techniquePublished by Institute of Electrical and Electronics Engineers (IEEE) ,2014
- RF Energy Harvesting and Transport for Wireless Sensor Network Applications: Principles and RequirementsProceedings of the IEEE, 2013