New Search

Export article
Open Access

RESEARCH OF ACOUSTIC MEASUREMENTS OF BENDING FORCE ON HIGH VOLTAGE INSULATORS

Tomas Debnar, Peter Kubinec, Michal Micjan
Technology transfer: fundamental principles and innovative technical solutions , Volume 3, pp 35-38; doi:10.21303/2585-6847.2019.001030

Abstract: The aim of this research was to research and verify the possibilities of using microphone to determine mechanical load acting on high voltage insulator. The insulator features a cable hole, which can be used for optical cables. Let’s use this hole as a microphone mount in order to listen to sounds inside of an insulator. The cable hole and the insulator end holes were filled with insulating foam to insulate microphone from the external interferences. Acoustic measurements were performed on the outdoor post insulator C30-850-II. The insulator was placed in bending machine and was repeatedly mechanically stressed by bending forces. The results of this research verify the suitability of the selected method for future use in the proposed device for detection of mechanical overload of high-voltage insulators.
Keywords: High Voltage Insulator / Stressed / bending forces / Research and Verify

Scifeed alert for new publications

Never miss any articles matching your research from any publisher
  • Get alerts for new papers matching your research
  • Find out the new papers from selected authors
  • Updated daily for 49'000+ journals and 6000+ publishers
  • Define your Scifeed now

Share this article

Back to Top Top